Originally Posted By: sas123
i see you do ins file you can tell me how you build ins file
thank you


Originally Posted By: Sokratis 1974
When you have your sampler that you want to create please folow this steps:

1) PRESS THE (WAV) BUTTON AND PRESS (EDIT)

2) SELECT A WAV FILE AND PRESS ENTER (your samples your it will be supposed, they have name with the keys tone (for example C_3, D_3, E_3.....etc)

3) WITH KEY (F1_START) sets the start of note range on the keyboards

4) (F2_END) sets the end of the note range

5) (F3_KEY) sets the basic pitch (original tune of note)

6) (F4_PITCH) it can de TRACKING, that is tuning, for each dutton of the keyboards, or FIXED that is with fixed pitch for any keys of the keyboards (for example a Drums sample)...

7) (F8_END_POINT) sets where the sounds ends.

8) (F9-START POINT) sets where sounds loops (looping)

When finisch press SAVE give a name and it will be saved in MSP folder.
For more information please look the manual in 115 page..


Originally Posted By: sas123
no sokratis this is msp and i know to do .look in this topic

http://www.synthzone.com/ubbs/Forum22/HTML/001603.html

i meen to do this
i put this ins ram file in drum set (user "ins"and it's work with live drum
so i want to build set what i need
thank you


Friends..i see that;many Audya owners looking for a solution about oriental percussions to make oriental styles..

as you know msp files can not use as a drum set.you need ins files that; prepared as a drum set..

And now...i have 3 ins files from Ketron Turkey..that files contains Turkish and oriental percussions and they can use as a drum set DONT PANIC!!! i will share with you...

i have also 36 Turkish instruments ins files like Baglama Kanoun Bozuki Cumbus Saz Electro saz Cura Balaban.. over 20 mb..i will share with you soon..

ok here the link for percussions sets..its my own web site..if you write styles with this sets please send to me..this is the cost of files please send...

http://www.duobombastic.com/audya.html

enjoy......

Originally Posted By: Sokratis 1974
My friend.....
A Program file in Audya it constituted by three different Midi Channels...
This therefore means that it will be supposed are used three channels in Patern Edit…
Ketron has a other logic of manufacture sounds….
My opinion they is that they is very good because we do not overload the polyphony.....
You have thought that (for example a Korg Pa_2 xpo) does have up to and 16 oscillators per sound and each oscilator is a voice?
so....You think… if we have 5 sounds in a style, with 5 oscilators per sound, then we have 25 voices per Chord...
If we have 5 sounds with 10 oscillators 50 voices…
And if we have 5 with 16 oscillators 80 voices…
Therefore….Korg Pa_2 has 120 voices….
If we have 3 more sounds with 10 oscilators in STS SOLO, we have more 30 voices…
Total
Hence in each in per note we have reached in the limit….
If now we have 6 notes in our right hand, then that we have reached? ..... you make therefore the addition…
80+30=110….
110 voice per note.....
Audya a sound is a note.....And....Of course the Audio Drums no need midi polyphony......
So.....Now in Audya we play with more freedom......
It is my opinion.....I am working every day and I have Korg Pa_800 (also 120 voice) and Ketron Audya and SD_1....
I think that therefore I know about this......
Thank you.....


Originally Posted By: pastroccio
hi sokatis, I have 2 question and some comments:
1. it's normal that msp editor work with wave only in mono mode (you can add mono or stereo files but the final .mps will be always mono )?
if is true, than never can create good stereo sound, I can't believe !( only mix 2 mps in program but no sense)
2. often my file mps after created and saved (I tested with only 3-4 notes too) work fine but after reboot audya tell "this is not a valid .mps " and cannot load cannot edit. must make new.
About .ins i'm italian, and I talk with a big person of ketron that I suppose you know it. he told me they think about release a software for make .ins. but only think at moment and now total silence.
I don't believe need hardware. is only software for mix wave ecc.
the internal msp editor is very very bad. it's impossibile to create stereo sound, impossible to create a multilayer sample.. and of course if we create a drumkit (with only mono sound !) you cannot mix with internal drum sound. so... bad
I want to found 1 people that have create a good piano or good guitar msp file. it's impossibile without multilayer, without stereo... mps editor is for only for game with it


Originally Posted By: Sokratis 1974
Hi my friend....
1) Of course in MSP files can use mono and Stereo wav files....

2) Yes....Now no is possible can edit a MSP when you saved....I know....It is bad....

3) About with create new INS file of course need and software, but it need a cable to connect with Audya to PC....But all this is exclusive for engeneer of Ketron......
I no have it cable of course....
This info I know for a engeneer of Ketron that I collaborate...

4) You are right....
Of course need multilayer for a good natural sound.....
But a MSP sound it is a Layer....However in a Program you can put 3 MSP or INS and can put up 3 layers (with MONO or STEREO wav files) and saved as Program...

5) I dont know about with INS file software for users.....

6) I beyond from a collaboration that I have with the company I cannot know also many drawings that they have .....
I know somebody but not all.....


Originally Posted By: Sokratis 1974
So.....
You are right…
Is impossible we load Stereo Wav files….
A stereo file it will coverted in MONO file....
It was been reported from me in the company, through the engineer who I collaborate .....
We are in waiting .......
However we can make a combine in a Program, and put 2 or 3 mono MSP , in a stereo sound.......
_________________________
Make sure you'll fly forever!