SYNTH ZONE
Visit The Bar For Casual Discussion
Page 1 of 2 1 2 >
Topic Options
#433109 - 06/19/17 04:28 AM Do not update to 5.4B confirmed
rob Offline
Member

Registered: 09/02/14
Posts: 48
Loc: Australia
as I spoke in sokratis post,i had a issue with changing style to style being dangerously slow and loops going out of wack,at first I thought it was due to the extra 70mb wav loops that I added to my ketron after updating,well I was wrong,i then removed those loops and patterns and still had the same problem so then I downgraded back to 53D and everything was working without the major deley I also found strange when I was creating pattern and insert a loop in A and set the tempo to eg,120 then went to insert loop B and it was set to 56 automaticly then change that to 120 and went back to variation A and that change to tempo 56,very strange I have made many styles in the years and never experienced this,it is a definite botched update,be aware no good


Edited by rob (06/19/17 04:28 AM)

Top
#433167 - 06/20/17 02:13 AM Re: Do not update to 5.4B confirmed [Re: rob]
Tonewheeldude Offline
Moderator

Registered: 01/21/10
Posts: 1469
Hi Rob - have you run the checksum tests to make sure your Audya is healthy?

see here

Top
#433223 - 06/20/17 11:25 PM Re: Do not update to 5.4B confirmed [Re: rob]
ajodanimario Offline
Member

Registered: 11/20/12
Posts: 63
Loc: espaņa
No one else has tried the new update, I at the moment in my audya it seems that everything works well.

Top
#433231 - 06/21/17 06:39 AM Re: Do not update to 5.4B confirmed [Re: Tonewheeldude]
rob Offline
Member

Registered: 09/02/14
Posts: 48
Loc: Australia
with the os 53d everything past as healthy except this last process


Attachments
IMG_2651.JPG (34 downloads)


Top
#433248 - 06/21/17 03:04 PM Re: Do not update to 5.4B confirmed [Re: rob]
Tonewheeldude Offline
Moderator

Registered: 01/21/10
Posts: 1469
Open the SYSTEM folder, open the FACTORY folder and then the TABLE folder. Select the ALLTABS.TAB file and confirm by pressing the ENTER key.

Retest the alltabs checksum.

Top
#433267 - 06/22/17 01:11 AM Re: Do not update to 5.4B confirmed [Re: Tonewheeldude]
rob Offline
Member

Registered: 09/02/14
Posts: 48
Loc: Australia
I retested the alltabs and and everything was ok only at the end it shows(load resources internal malloc error)?

Top
#433268 - 06/22/17 01:25 AM Re: Do not update to 5.4B confirmed [Re: rob]
Tonewheeldude Offline
Moderator

Registered: 01/21/10
Posts: 1469
I think you need to seek more direct help Rob. What country are you in?

Top
#433269 - 06/22/17 02:10 AM Re: Do not update to 5.4B confirmed [Re: Tonewheeldude]
rob Offline
Member

Registered: 09/02/14
Posts: 48
Loc: Australia
Australia,now i am in trouble after doing that,there is no styles at all in the ketron and doesnt open style section up?


Edited by rob (06/22/17 02:29 AM)

Top
#433347 - 06/23/17 07:59 PM Re: Do not update to 5.4B confirmed [Re: rob]
Ketron_AJ Online   content
Moderator

Registered: 03/21/01
Posts: 2947
Loc: Middletown, DE
Let me help you resolve this. Please contact me off-line.

Thanks,
_________________________
[KETRON - USA]
Design Engineer & Product Specialist.
www.KetronAmerica.com

Top
#433349 - 06/23/17 10:07 PM Re: Do not update to 5.4B confirmed [Re: Ketron_AJ]
rob Offline
Member

Registered: 09/02/14
Posts: 48
Loc: Australia
I must say a big thankyou to aj for helping me to fix the problem,it makes a huge difference when someone knows his products back to front

Top
Page 1 of 2 1 2 >

Moderator:  Admin, Ketron_AJ, Tonewheeldude 



Help keep Synth Zone Online