SYNTH ZONE
Visit The Bar For Casual Discussion
Page 1 of 2 1 2 >
Topic Options
#415952 - 02/03/16 08:46 AM Utility Shelf for double X stand for 970?
Bill in Dayton Offline
Senior Member

Registered: 08/23/04
Posts: 2202
Loc: Dayton, OH USA
I have been using this stand for my Tyros for years...

Quic-loc kb stand

It is on the heavy side, but provides a very stable base for the Tyros. Also, very important to me is the ability to connect a small utility shelf to the side of it that I set my Bose Tonematch mixer on and can reach easily as I play.

I am interested in finding an attachment for a double X stand.

The psr s970 is roughly 5-6 inches shorter that a Tyros is, and the old quicloc stand hangs well over the ends of the new kb .

Suggestions?

Thanks,

Bill
_________________________
Bill in Dayton

Top
#415956 - 02/03/16 09:22 AM Re: Utility Shelf for double X stand for 970? [Re: Bill in Dayton]
travlin'easy Offline
Senior Member

Registered: 12/08/02
Posts: 15560
Loc: Forest Hill, MD USA
Bill, I use the Quic Loc QL-642, which is a two-tier stand that is very strong and quick to set up. I have a custom console that I constructed just for this stand and posted directions on how to build it on the PSR-Tutorial site. For me, it has been the best thing since sliced bread in that it holds all the power supplies, AC surge strip, makes a nice lighted sign, illuminates the entire keyboard, holds my laptop and vocal harmonizer, and still has lots of room for other gear if needed.

If you already have a good stand, here's something that may be in line with what you are looking for. Quikloc LPH-X



Gary
_________________________
PSR-S950, TC Helicon Harmony-M, Digitech VR, Samson Q7, Sennheiser E855, Custom Console, and lots of other silly stuff!

K+E=W (Knowledge Plus Experience = Wisdom.)

Top
#415957 - 02/03/16 09:33 AM Re: Utility Shelf for double X stand for 970? [Re: Bill in Dayton]
Dnj Offline
Senior Member

Registered: 09/21/00
Posts: 43703
I have one of those LPh-x holders....a bit heavy but rugged for stage work..

Top
#415958 - 02/03/16 09:45 AM Re: Utility Shelf for double X stand for 970? [Re: Dnj]
Bill in Dayton Offline
Senior Member

Registered: 08/23/04
Posts: 2202
Loc: Dayton, OH USA
Not sure if this is going to work, but here's a picture of my current setup. I also mispoke earlier about what sits on the utility shelf. Actually, a single unit rack case sits on it, and the small Bose Tonematch sits on top of that...

https://www.facebook.com/photo.php?fbid=...e=3&theater

(Donny P. - if this image doesn't work, I've put the picture at the top of my facebook page...you should be able to see it there...)

I'm wanting to replace the big clunky stand with a double X stand, but find a way to attach a shelf off to the right for the rack unit and mixer...

smile


Edited by Bill in Dayton (02/03/16 09:46 AM)
_________________________
Bill in Dayton

Top
#415960 - 02/03/16 09:54 AM Re: Utility Shelf for double X stand for 970? [Re: Bill in Dayton]
Dnj Offline
Senior Member

Registered: 09/21/00
Posts: 43703
Originally Posted By: Bill in Dayton
Not sure if this is going to work, but here's a picture of my current setup. I also mispoke earlier about what sits on the utility shelf. Actually, a single unit rack case sits on it, and the small Bose Tonematch sits on top of that...

https://www.facebook.com/photo.php?fbid=...e=3&theater

(Donny P. - if this image doesn't work, I've put the picture at the top of my facebook page...you should be able to see it there...)

I'm wanting to replace the big clunky stand with a double X stand, but find a way to attach a shelf off to the right for the rack unit and mixer...

smile



is this it?


Attachments
314589_10151406068441204_848049414_n.jpg




Edited by Dnj (02/03/16 09:55 AM)

Top
#415962 - 02/03/16 10:24 AM Re: Utility Shelf for double X stand for 970? [Re: Bill in Dayton]
travlin'easy Offline
Senior Member

Registered: 12/08/02
Posts: 15560
Loc: Forest Hill, MD USA
Bill, here's my current setup with the custom console. The beer pitcher is my tip jar - the beer is sitting on my keyboard case - it was 90 degrees that afternoon and I sure needed it.



Gary cool


Edited by travlin'easy (02/03/16 10:25 AM)
_________________________
PSR-S950, TC Helicon Harmony-M, Digitech VR, Samson Q7, Sennheiser E855, Custom Console, and lots of other silly stuff!

K+E=W (Knowledge Plus Experience = Wisdom.)

Top
#415965 - 02/03/16 10:48 AM Re: Utility Shelf for double X stand for 970? [Re: Dnj]
Bill in Dayton Offline
Senior Member

Registered: 08/23/04
Posts: 2202
Loc: Dayton, OH USA
No, it should show a Christmas tree and a sign that says Asbury Hall...
_________________________
Bill in Dayton

Top
#415966 - 02/03/16 10:49 AM Re: Utility Shelf for double X stand for 970? [Re: Bill in Dayton]
Dnj Offline
Senior Member

Registered: 09/21/00
Posts: 43703
Originally Posted By: Bill in Dayton
No, it should show a Christmas tree and a sign that says Asbury Hall...


dont see it can you post it here please?

Top
#415967 - 02/03/16 10:50 AM Re: Utility Shelf for double X stand for 970? [Re: Dnj]
Bill in Dayton Offline
Senior Member

Registered: 08/23/04
Posts: 2202
Loc: Dayton, OH USA
Trying to figure out how to post it... Do I use the "file manager">?
_________________________
Bill in Dayton

Top
#415968 - 02/03/16 10:52 AM Re: Utility Shelf for double X stand for 970? [Re: Dnj]
Bill in Dayton Offline
Senior Member

Registered: 08/23/04
Posts: 2202
Loc: Dayton, OH USA
trying again...


Attachments
T2setup.jpg


_________________________
Bill in Dayton

Top
Page 1 of 2 1 2 >

Moderator:  Admin, Diki, Kerry 



Help keep Synth Zone Online