SYNTH ZONE
Visit The Bar For Casual Discussion
Topic Options
#74189 - 11/26/99 12:02 PM YS200 program changes
MCP Offline
Junior Member

Registered: 11/26/99
Posts: 22
Loc: The Netherlands
Does anyone know how to send program changes over 100 with the YS200 in Cubase VST? I would like to send this sysex to my soundcard (Terratec EWS64XL) however, until 99 is possible, but then it jumps right back to 00...

Many TNX in advance...

MCP

Top
#74190 - 11/27/99 04:29 AM Re: YS200 program changes
buinu Offline
Member

Registered: 09/27/98
Posts: 310
Loc: Atlanta, GA USA
I'm not exactaly sure where in Cubebase, but there should be a field where you will enter bank changes as well as program changes. In Vision this window looks like: 0/2/32 and as I have it written, will select program number 232. Program #99 would be chosen by inserting 0/0/99 and program #100 would be 0/1/00. I have only had to use the first set of numbers (MSB I believe) to access the different banks when I had a Roland 2080 and, from what I recall, were 0, 32, 64 or 86. Hope this helps.

Top
#74191 - 11/29/99 05:57 AM Re: YS200 program changes
MCP Offline
Junior Member

Registered: 11/26/99
Posts: 22
Loc: The Netherlands
Buinu,

Thanks for your reply! What I actually meant was, that I directly want to input the number from my YS200 synthesizer (e.g. I want to type number 115 for sound number 114). The problem is, that as soon as I specify a number over 100, it jumps back to 0...

Many tnx anyone can help me with this...

Mcp

Top

Moderator:  Admin 



Help keep Synth Zone Online