Posted by: MCP
YS200 program changes - 11/26/99 12:02 PM
Does anyone know how to send program changes over 100 with the YS200 in Cubase VST? I would like to send this sysex to my soundcard (Terratec EWS64XL) however, until 99 is possible, but then it jumps right back to 00...
Many TNX in advance...
MCP
Posted by: buinu
Re: YS200 program changes - 11/27/99 04:29 AM
I'm not exactaly sure where in Cubebase, but there should be a field where you will enter bank changes as well as program changes. In Vision this window looks like: 0/2/32 and as I have it written, will select program number 232. Program #99 would be chosen by inserting 0/0/99 and program #100 would be 0/1/00. I have only had to use the first set of numbers (MSB I believe) to access the different banks when I had a Roland 2080 and, from what I recall, were 0, 32, 64 or 86. Hope this helps.
Posted by: MCP
Re: YS200 program changes - 11/29/99 05:57 AM
Buinu,
Thanks for your reply! What I actually meant was, that I directly want to input the number from my YS200 synthesizer (e.g. I want to type number 115 for sound number 114). The problem is, that as soon as I specify a number over 100, it jumps back to 0...
Many tnx anyone can help me with this...
Mcp