SYNTH ZONE
Visit The Bar For Casual Discussion
Topic Options
#32350 - 11/21/02 03:18 AM Volume pedal - does not work perfect
poul erik jensen Offline
Junior Member

Registered: 11/03/02
Posts: 10
Loc: Denmark
Hi There - my volumepedal does not work correct at 3/4 full - then it suddenly
"crachover" to full volume size - I have
played on Solton MS 50 and 100 - and here
there were no problems at all. - please help.

Poul Erik Jensen

Top
#32351 - 11/21/02 09:43 AM Re: Volume pedal - does not work perfect
Ketron_AJ Offline
Moderator

Registered: 03/21/01
Posts: 3583
Loc: Middletown, DE
poul erik jensen,

Variable resistor/potentiometer in volume pedal might need cleaning.

Thanks,

AJ
_________________________
[KETRON - USA]
Design Engineer & Product Specialist.
www.KetronAmerica.com

Top
#32352 - 11/21/02 05:48 PM Re: Volume pedal - does not work perfect
SBPC Offline
Member

Registered: 01/30/01
Posts: 125
Loc: Goleta, CA, USA
I think AJ gave you good advice. Just last week I noticed that the volume pedal I use with my MS60 behaved pretty much the same way as you described. I took the Yamaha pedal apart so I could get at the potentiometer and then liberally sprayed a commercial electronic contact cleaner into the small openings on the pot, rotatating the control shaft at the same time. I let things dry off and then reasssmbled it and it's been fine ever since. Hope this works for you as well.
Paul C.

Top
#32353 - 11/22/02 03:04 AM Re: Volume pedal - does not work perfect
poul erik jensen Offline
Junior Member

Registered: 11/03/02
Posts: 10
Loc: Denmark
Problems with volume pedal on Ketron SD1!!

Poul Erik Jensen[/B][/QUOTE]

Hi again - thanks for the answers - but I
did not tell you - that my volumepedal is quite new and on my earlier Solton Keyboards
MS 50 & 100 - there were no problems at all.
I am sure that the problem is the new Ketron-
so I hope the new update comming soon - will
help it. - thanks - Poul Erik

Top

Moderator:  Admin, Kerry, Ketron_AJ, Tonewheeldude 



Help keep Synth Zone Online