Volume pedal - does not work perfect

Hi There - my volumepedal does not work correct at 3/4 full - then it suddenly
"crachover" to full volume size - I have
played on Solton MS 50 and 100 - and here
there were no problems at all. - please help.

Poul Erik Jensen

poul erik jensen,

Variable resistor/potentiometer in volume pedal might need cleaning.

Thanks,

AJ

I think AJ gave you good advice. Just last week I noticed that the volume pedal I use with my MS60 behaved pretty much the same way as you described. I took the Yamaha pedal apart so I could get at the potentiometer and then liberally sprayed a commercial electronic contact cleaner into the small openings on the pot, rotatating the control shaft at the same time. I let things dry off and then reasssmbled it and it's been fine ever since. Hope this works for you as well.
Paul C.

Problems with volume pedal on Ketron SD1!!

Poul Erik Jensen[/B][/QUOTE]

Hi again - thanks for the answers - but I
did not tell you - that my volumepedal is quite new and on my earlier Solton Keyboards
MS 50 & 100 - there were no problems at all.
I am sure that the problem is the new Ketron-
so I hope the new update comming soon - will
help it. - thanks - Poul Erik