SYNTH ZONE
Visit The Bar For Casual Discussion
Topic Options
#313111 - 01/19/11 04:06 PM Audya 76 Question
Bernie9 Offline
Senior Member

Registered: 09/21/02
Posts: 5508
Loc: Port Charlotte,FL,USA
I have two screw holes on the bottom of my keyboard. They are located on the extreme right and left, where two other screws are. I have to assume they fell out or never put in. Since my board is only two months old, I doubt if they loosened up and fell out. I would take out other screws and try it, but afraid something is going to fall off in there and I would be in a real mess.

I have tried twice to my dealer and AJ, but no answer. Can someone please look for me on their Audya.

Bernie
_________________________
pa4X 76 ,SX900, Audya 76,Yamaha S970 , vArranger, Hammond SK1, Ketron SD40, Centerpoint Space Station, Bose compact

Top
#313388 - 01/21/11 01:23 PM Re: Audya 76 Question [Re: Bernie9]
Tony Hughes Offline
Senior Member

Registered: 01/30/06
Posts: 3944
Bernie,

Not all the screws in a 76 note KB are needed, it will run without, as long as the ones on the back are in and the two at each end under the front of the ends keys left and right are in it won't fall to bit. The only screw missing or loose to worry about are in your head, I have a few loose now.

Good luck, do you like the Audya.

Tony
_________________________
Tyros 4/Pair SR 350/ PC with a i8 intel chip, XENYX 802, Ford Focus 2 litre/Tascam DR07/Brother printer/Designjet 500/ our Doris/5 Grandchildren/ white boxers short Kymart shipped over and Typhoo Tea Earl Grey

Top
#313398 - 01/21/11 03:00 PM Re: Audya 76 Question [Re: Bernie9]
Bernie9 Offline
Senior Member

Registered: 09/21/02
Posts: 5508
Loc: Port Charlotte,FL,USA
Hi Tony
Ha ha, I think most musicians have that problem. I appreciate your reply.

I love my Audya, but then, so far, I have had no problems. If I did, my answer would be much different.
Bernie
_________________________
pa4X 76 ,SX900, Audya 76,Yamaha S970 , vArranger, Hammond SK1, Ketron SD40, Centerpoint Space Station, Bose compact

Top
#313412 - 01/21/11 05:09 PM Re: Audya 76 Question [Re: Bernie9]
Tonewheeldude Offline
Moderator

Registered: 01/21/10
Posts: 1537
those screws are probably two out of the four that hold the front edge of the top panel down. they are a fairly standard screw though, if you take one out of the back (the row just below the lip) to have a look at, the ones on the underside are the same so replacement shouldn't be too hard.

Top
#313459 - 01/22/11 02:03 AM Re: Audya 76 Question [Re: Bernie9]
Tony Hughes Offline
Senior Member

Registered: 01/30/06
Posts: 3944
Bernie,

If you send me your email address I will send you a Power Point of the inside of your Audya you will then see where the screws are missing from, perhaps Ketron ran out on the production line, they are churning Audyas out by the 1000s

Tony Hughes
_________________________
Tyros 4/Pair SR 350/ PC with a i8 intel chip, XENYX 802, Ford Focus 2 litre/Tascam DR07/Brother printer/Designjet 500/ our Doris/5 Grandchildren/ white boxers short Kymart shipped over and Typhoo Tea Earl Grey

Top
#313463 - 01/22/11 02:16 AM Re: Audya 76 Question [Re: Tony Hughes]
Gunnar Jonny Offline
Senior Member

Registered: 04/01/01
Posts: 4333
Loc: Norway
Originally Posted By: Tony Hughes
..... they are churning Audyas out by the 1000s


Really confused
_________________________
Cheers 🥂
GJ
_______________________________________________
"Success is not counted by how high you have climbed
but by how many you brought with you." (Wil Rose)

Top
#313470 - 01/22/11 04:10 AM Re: Audya 76 Question [Re: Bernie9]
Bernie9 Offline
Senior Member

Registered: 09/21/02
Posts: 5508
Loc: Port Charlotte,FL,USA
Tonewheeldude
Thank you for your suggestion.
Tony
My e-mail is posted in my profile: bernie14@earthlink.net. I would love to see the PP.
Bernie
_________________________
pa4X 76 ,SX900, Audya 76,Yamaha S970 , vArranger, Hammond SK1, Ketron SD40, Centerpoint Space Station, Bose compact

Top
#313499 - 01/22/11 01:26 PM Re: Audya 76 Question [Re: Bernie9]
Bernie9 Offline
Senior Member

Registered: 09/21/02
Posts: 5508
Loc: Port Charlotte,FL,USA
Thank you Tony
Both the Service manual and the Powerpoint presentation on taking the cover off the Audya are well done and much appreciated.
Bernie
_________________________
pa4X 76 ,SX900, Audya 76,Yamaha S970 , vArranger, Hammond SK1, Ketron SD40, Centerpoint Space Station, Bose compact

Top

Moderator:  Admin, Kerry, Ketron_AJ, Tonewheeldude 



Help keep Synth Zone Online