SYNTH ZONE
Visit The Bar For Casual Discussion
Topic Options
#305612 - 10/01/04 05:34 PM Receive midi files from Casio keyboard to PC
Maverick Offline
Junior Member

Registered: 10/01/04
Posts: 3
Loc: Las Vegas, NV USA
Hi:

Problem: Canít receive music from my Casio WK-1630 keyboard to my PC using Microsoft XP.

Sending audio midi file from my keyboard to PC successfully, according to my manual. Problem is on computer receiving end. I don't know what to do next.

Audio software: Acid 4.0 and Soundforge 1.1

Instructions in both have no reference to how to receive midi files. I tried using the new MS Player 10 (with new recorder capabilities), and the standard MS Recorder. I just can't find any reference on how to receive keyboard or other device input and save it as a file. If I can get to that point, I know how to use the software.

Note: Device manager did show a midi device until I upgrade my operating system from MS 2000 to MS XP. Now it's gone. DXDIG (XP diagnostics) say my midi device is connected and working but I don't know how to access it.

Any help would greatly be appreciated.
Kindest regards,
Maverick

Top
#305613 - 10/09/04 04:44 AM Re: Receive midi files from Casio keyboard to PC
wkStudio Offline
Junior Member

Registered: 10/07/04
Posts: 8
Loc: South Florida, USA
Hi Maverick:
I'm assuming that you are using a soundcard with midi in/out and not an usb or external midi device.
Always start with the basics. Start with the MIDI cables. Try different cables. Second, get the latest drivers and check if your soundcard is sharing it's IRQ with other hardware. This is probably the main cause for the souncard to act up, even when it shows that everything is ok. Reinstall the drivers or move the soundcard to another empty slot in your computer. You can also try to connect another MIDI sending device to the MIDI port to check if it is receiving. Last, but not least, some keyboards do not send MIDI by default. Some have an internal "send midi out" switch that has to be enabled. Check that it send in the correct chanel and that it matches the recording midi chanel.
But, I would bet that your problem will be solved by removing the soundcard and drivers and installing again. I have done this so many times over the years that it's not funny anymore!
These suggestions are based on the minimal info given in your post and my own experience.
If the soundcard is built in your motherboard, is it enabled? Is your software configured to receive from your soundcard's midi out?
_________________________
Health & Joy

Top

Moderator:  Admin 



Help keep Synth Zone Online