SYNTH ZONE
Visit The Bar For Casual Discussion
Page 2 of 3 < 1 2 3 >
Topic Options
#185404 - 11/10/04 06:52 PM Re: PSR 3000 MIC settings
Beakybird Offline
Senior Member

Registered: 01/27/01
Posts: 2227
I've also owned the Crown CM311A for 2 1/2 years, and I'm extremely happy with it.

I am also happy with many of Gary's settings. I've tweaked them a bit for my vocals.

Beakybird

Top
#185405 - 11/12/04 01:29 AM Re: PSR 3000 MIC settings
STAM Offline
Member

Registered: 10/27/01
Posts: 246
Loc: Brussels, BELGIUM
Gary, Beakybird

Can you compare the crown CM311A in terms of quality of sound to a Shure Beta 58 A?

Shure makes the Beta 54 headset microphone. Has anybody tried it?

Thanks

STAM

Top
#185406 - 11/12/04 06:20 AM Re: PSR 3000 MIC settings
travlin'easy Offline
Senior Member

Registered: 12/08/02
Posts: 15560
Loc: Forest Hill, MD USA
Though I have not tried the 58A yet, the CM-311-A is equal to the Sennheiser 855e and the SM58. As for the Shure 54 headset mic, I have only talked with someone that had one, and he said he wished he had purchased the CM-311-A instead.

Good Luck,

Gary
_________________________
PSR-S950, TC Helicon Harmony-M, Digitech VR, Samson Q7, Sennheiser E855, Custom Console, and lots of other silly stuff!

K+E=W (Knowledge Plus Experience = Wisdom.)

Top
#185407 - 11/12/04 10:29 PM Re: PSR 3000 MIC settings
Uncle Dave Offline
Senior Member

Registered: 12/01/99
Posts: 12800
Loc: Penn Yan, NY
Gar,
You know I love ya, but I think the Crown sounds totally different from those mics you mentioned. Proximity effect aside, they have comepletely different tone colors. The Senheiser and the Shure don't even sound like they are on the same block.

I know you like the headset design, but c'mon ....... these three mics are apples, oranges and grapefruits !
_________________________
No longer monitoring this forum. Please visit www.daveboydmusic.com for contact info

Top
#185408 - 11/13/04 05:12 AM Re: PSR 3000 MIC settings
STAM Offline
Member

Registered: 10/27/01
Posts: 246
Loc: Brussels, BELGIUM
Thank you Gary for the reply

Stam

Top
#185409 - 11/13/04 06:20 AM Re: PSR 3000 MIC settings
travlin'easy Offline
Senior Member

Registered: 12/08/02
Posts: 15560
Loc: Forest Hill, MD USA
I don't agree Dave, and neither does anyone who listened to the post I made several months ago when I performed several songs using the Sennheiser 855E and Crown CM-311-A. No one knew which mic was which until after their evaluation. Most everyone thought the Crown was actually the Sennheiser. Those of us that use headset mics were equally astonished at the results. Don't go by the specification sheets--evaluate them by recording something, then listening carefully to it. It works for me!

Gary
_________________________
PSR-S950, TC Helicon Harmony-M, Digitech VR, Samson Q7, Sennheiser E855, Custom Console, and lots of other silly stuff!

K+E=W (Knowledge Plus Experience = Wisdom.)

Top
#185410 - 11/13/04 07:16 AM Re: PSR 3000 MIC settings
Dnj Offline
Senior Member

Registered: 09/21/00
Posts: 43703
I have changed my 3k MIC settings from the above due to my new PA system setup
[Two Mackie SRM350's/Roland KCW1 Sub ...
I am now using a Shure beta 58 Mic which is wonderful for my voice.

Psr 3k Mic Settings

Rear Mic Gain Pod 9 O’clock


Low Mid High
80/-1 2.0/+0 10k/+5


Noise gate Compressor
Off/-60 on/-20/5.0/110


play/off/lower/0-bal/auto/xf/off/ vol110

KB EQ

0.7 / 80Hz 2-2-0-3-7

Top
#185411 - 11/13/04 07:48 AM Re: PSR 3000 MIC settings
PraiseTheLord Offline
Member

Registered: 08/24/04
Posts: 782
Loc: N Fort Myers, FL, USA
Donny, are all your KB EQ settings +, i.e.

+2, +2, 0, +3, +7

------------------
Graham
_________________________
Graham, Korg Pa1000, Korg G1 Air, Countryman E6, Roland BA330, 2 x Roland CM-30, , Mackie SRM150

Top
#185412 - 11/13/04 07:58 AM Re: PSR 3000 MIC settings
DonM Offline
Senior Member

Registered: 06/25/99
Posts: 16735
Loc: Benton, LA, USA
Gary, the Crown might sound like the Sennheiser, but the Sennheiser doesn't sound like the SM58. They are way apart. I have to change my settings dramatically when I change from SM58 to the 855.
Basically the 855 sounds much like the Shure SM87, a much more expensive and responsive mic, and I e.q. them much the same. In fact neither needs much e.q. at all.
I also use a Samson R11 some, and, because of the tremendous amount of proximity effect, almost all the bass must be rolled off.
DonM

Quote:
Originally posted by travlin'easy:
I don't agree Dave, and neither does anyone who listened to the post I made several months ago when I performed several songs using the Sennheiser 855E and Crown CM-311-A. No one knew which mic was which until after their evaluation. Most everyone thought the Crown was actually the Sennheiser. Those of us that use headset mics were equally astonished at the results. Don't go by the specification sheets--evaluate them by recording something, then listening carefully to it. It works for me!

Gary
_________________________
DonM

Top
#185413 - 11/13/04 08:16 AM Re: PSR 3000 MIC settings
Dnj Offline
Senior Member

Registered: 09/21/00
Posts: 43703
Hi Graham..

Yes all EQ is +

I only change the "LOW" sometimes depending on the room characteristics when I do a sound check, due to Rugs, Curtains, Tile, etc etc.....

Top
Page 2 of 3 < 1 2 3 >

Moderator:  Admin, Diki, Kerry 



Help keep Synth Zone Online