SYNTH ZONE
Visit The Bar For Casual Discussion
Topic Options
#118802 - 04/20/03 08:10 PM Sustain pedal
zuki Offline
Senior Member

Registered: 09/20/02
Posts: 4213
Hello,
Can anyone advise me if the polarity on the fatar or ensoniq cheapo sustain pedals can be changed for the VA? I left my expensive pedal in a hotel, along with my coat!
Thanks,
Zuki
_________________________
Korg PA3X / Yamaha P125 / Yamaha MX61 / QSC 8.2s / Zed mixers / Blue mics / Roland BR800

Top
#118803 - 04/21/03 06:46 AM Re: Sustain pedal
wrinkles303 Offline
Member

Registered: 03/24/02
Posts: 312
Loc: worthington ,ohio
i just connected a ps-15 (fatar) pedal to
my va76 it works fine. what pedal are you trying to use?
in the old days i use to cut the cable
and reverse the polarity of the wires.
in the korg i5, i can set this in the keyboard. good luck

Top
#118804 - 04/21/03 08:02 AM Re: Sustain pedal
BEBOP Offline
Senior Member

Registered: 01/02/00
Posts: 3770
Loc: San Jose, California
Zuki,
I recall that some keyboards use a normally open switch while others use a normally closed switch so they are interchangeable with out modification.
All the switches I have opened have three terminals on them. One pair is for NO and the other pair is for NC.
Desolder one of the wire leads from one pair to the other pair and it will work
Bebop
_________________________
BEBOP

Top
#118805 - 04/21/03 08:11 AM Re: Sustain pedal
travlin'easy Offline
Senior Member

Registered: 12/08/02
Posts: 14441
Loc: Forest Hill, MD USA
Zuki,
Nearly all sustain pedals are normally open leaf switches. Most keyboards, however, have an option where you can select the type you have and it will default to the selection upon start-up. I don't recommend cutting wires, mainly because there's a 66 percent chance of cutting the wrong wire.

Gary
_________________________
PSR-S950, Bose L1 Compact, TC Helicon Harmony-M, Digitech VR, Samson Q7, Sennheiser E855, Custom Console, and lots of other silly stuff!

Top

Moderator:  Admin 



Help keep Synth Zone Online