Originally posted by Ketron_AJ:
KK-Studio,
The 2nd Voice is controlled directly by the 2nd voice slidder volume on the left. By moving the slidder up and down, it's corresponding value is displayed on the default screen by F7. If you see a value (e.g 50) but still don't hear any sound, it could also be that you are using a voice (e.g soft strings) which has a gradual attack and as such, you will need to keep the key(s) pressed for a while to hear this sound (same is true if this sound is selected as the main/lead sound). Try changing it to e.g brass (a sound with a shart attack to test). Also, if using a PROGRAM Voice, the 2nd voice volume within the program might be turned down - change by pressing PROGRAM - EDIT and U2/7 to change the volume as the volume data here is obtained BEFORE that of the slidder.
Hope this helps.
Thanks,
AJ
I did tell him to try voices from each bank and he would have discovered what you are saying.
Previous Topic
Index
