one really important point I must mention. Yesterday I said that when you use the connection wizard and set it to computer/sequencer mode, then you couldn't access styles. THIS IS NOT TRUE, YOU CAN!!!

If you go to Menu/Midi/Edit System/NTA you can see three parameters, Channel, RX, and RX Octave. If you think about which channel you want the NoteToArranger information to come in on, set the Channel paramter to that... say channel 2. You may now move to the RX (receive) parameter and turn it on. You can receive information on as many or few channels as you like. This is why I have been able to control my styles from both pedals and lower keyboard on my organ.

It appears the connection Wizard has a few macros in it to set up the midi settings based on the regular settings players of typical controllers would require. However you do not have to use the Wizard at all. If you know what you want to achieve, you can do it be setting all the midi parameters manually, then save them as a midi set, for instant recall later.
_________________________
Roland G-70, FP-4, BK-7m, SonicCell, KC-350 x 2, DS-5 x 2, A300-Pro, Sonar X1 PE, BR1600CD
Yamaha HX-1 System 1, KA-20x2