From what I've learned, the Z2200 bass module is ~ 12" X 12" X 15". With no handles or grips, it seem it would be ackward to handle. Has anyone found a convenient way to transport this system?

Glenn, I just screwed a fold down leather luggage handle to the top of the woofer. I figured out where the center of gravity was and placed the handle over that spot. The woofer hangs down nice and straight and is a breeze to carry.
I plan to permanently mount the Z2200 control unit to the woofer ( I find no need to adjust anything while performing).
Also will replace the Satelite cables with heavier wire and phone plug ends, plus changing the jacks on the woofer to 1/4 inch phone plug types instead of the RCA jacks. These have not given me any trouble so far but have to be handled with more care than if they were phone plugs.
I will also change the plugs on the audio input cable to phone plugs so they will plug into the keyboard directly without using an adapter.
Walt

how do you mount 2 small speakers in gigs-on keybord?any smaller stands?

Just use industrial velcro to attach the control to the Sub box.....
as for the satelite speakers.........
get two small 4" pieces of 1" right angle aluminum....velcro or screww it to the bottom back end of the satelite speaker forked feet... with the angle facing down........then simply insert the part facing down INTO the MUSIC HOLDER SLOT ....instant speaker mounts!!!
Sub on the floor.

Carry the z2200 in a small canvas duffle bag....at the gig just unzip, drop the sides down, and put the satelites in the Groove on the KB and play!

Walt and DNJ are very innovative. Bravo.

I have to give credit to Gary Diamond for the 1" angle aluminum idea for the satelites....
he's a Genius!!

[This message has been edited by Dnj (edited 08-26-2004).]