What to do if you have a problem with your Ketron SD9-SD90-SD60?

How does that work with new models?
Does anyone know?
Thank you very much

Everything is there for Ketron Audya:

("In Addition:
1)If you have an Audya; as well as the OS version, also mention the last USB update performed. (currently 2010 or 2011).
2) include the results of a checksum test as follows:
______a) Hold F1 during power up
______b) Make a note of any FAILED tests THEN Press F5 to continue
______c) Press F2 (DSP0)
______d) Press the ENTER button to run a full test
______e) Make a note of the numbers in the right hand column along with any message (ERR or OK)

3) and also include alltabs checksum:
______a) Turn On the Audya normally and wait for the instrument to reach the normal play screen.
______b) Press F5 and USER 1/6 touch buttons
______c) Press the FORWARD touch button
______d) checksum is displayed on the lower left of screen (along with OK or ERR)

The factory WILL ASK for this information so do it first to speed things up.

Please note: due to an error in the test program (I know - the irony). F2 will likely show a false error. The correct checksum is 88F51D49 however you should still include the information in your report.
Edited by Tonewheeldude (02/02/16 06:22 AM)")

What to do if you have a problem with your Ketron SD9-SD90-SD60?

Buy a Yamaha

Pretty funny.
I have Yamaha Montage 6 and it sounds
much better than Genos.
I also have Ketron SD90.
Yamaha Genos is a very good keyboard, but Ketron is Ketron!

If you don't notice, you have a big problem with your ears

Maybe you noticed that I have a better combination

greetings