SYNTH ZONE
Visit The Bar For Casual Discussion
Topic Options
#435906 - 08/12/17 03:31 AM A Kn6500 Screen to TV
bruno123 Offline
Senior Member

Registered: 06/04/02
Posts: 3273
Loc: West Palm Beach, FL 33417
On my Kn7000 I was able to connect it to the TV and mirror what was on the keyboard screen.

Is it possible to have a technician add this feature onto a Kn6500?
John C.

Top
#435960 - 08/12/17 06:17 PM Re: A Kn6500 Screen to TV [Re: bruno123]
Bill Norrie Offline
Senior Member

Registered: 01/16/02
Posts: 2275
Loc: Richmond,North Yorkshire, UK
Hi John,
I very much doubt if this is possible..
I believe that the signal sent to the KN6500 screen is not in the same format as that required to connect directly to a TV Monitor or even a computer Monitor. The KN7000 has an additional integrated circuit on the PCB, which converts the signal being sent to the
KN7000's Digital Display, to one of two 'TV' standards : NTSC for USA TV and PAL for European/UK TV.
The option of NTSC/PAL output, is user selectable within the KN7000 operating system, as I'm sure you are aware, from your considerable experience with the KN7000.....

Since the KN6500 does not include this particular IC, then there will be no compatible signal to use to transfer to an external monitor.

If your question is related to a user who possibly has difficulty reading the small characters (Poor Vision ?) or maybe to show the screen in a larger format for demonstration/tuition, then a possible solution would be to use a video camera to 'Look' at the screen and connect its output to a compatible TV / Video Monitor....
Not very elegant... but may produce usable results.

Top
#435981 - 08/13/17 02:22 AM Re: A Kn6500 Screen to TV [Re: Bill Norrie]
bruno123 Offline
Senior Member

Registered: 06/04/02
Posts: 3273
Loc: West Palm Beach, FL 33417
Thank you Bill, you are always there to help.

John C.

Top

Moderator:  Admin 



Help keep Synth Zone Online