SYNTH ZONE
Visit The Bar For Casual Discussion
Page 2 of 4 < 1 2 3 4 >
Topic Options
#35957 - 08/17/10 03:18 PM Re: Few Audya questions
fozzie Online   content
Member

Registered: 03/02/07
Posts: 99
Quote:
Originally posted by KK-Studio:
Hello to every Audya owner!

I bought an Audya a month ago and I completely love it! But I have e few questions.
Do you guys have noticed that hihat changes "PAN" from right to left sometimes? This is very annoying to me because i do many recordings on DAW. I havent yet got the usb pen drive, hopefully this one fixes this problem. I currently have the OS 4.1A.

And one thing I cant understand is when I push the 2nd voice button, the second voice doesn't sound anything. The light is lit but no sound comes. I'm a former Tyros 2 and 3 owner so there are many new things to learn with a new brand. So do i have to do anything else to activate the second voice or is there some setting wrong or the keyboard are wrong?

/KK-Studio Sweden


Hello KK!

Fick du någon ordning på Audyan?
_________________________
Ketron Audya-76, Ketron SD 90, Ketron SD1000, Korg PA5X, Yamaha Genos, Zoom R-24, Zoom H2n, Guitars, Amps, Band in a box 2023 audiophile, Ipad PRO with Auria and iConnect AUDIO4 interface, etc. etc.

Top
#35958 - 08/17/10 04:21 PM Re: Few Audya questions
Ketron_AJ Offline
Moderator

Registered: 03/21/01
Posts: 3583
Loc: Middletown, DE
Dusan,

A lot of what you mention below are 'user error' and not bugs. Here are some answers for you ...

-in piano mode if you playing harder you can activated drums in aranger section
>>>AJ: This is because in STYLE MODE your AFTER FILL (F7) is on. AFTER FILL means you activate the fill in by pressing harder on the keys, regardless of Piano mode on or off. Turn this feature off and save in Custum set up if you do not want to repeat this each time your machine is turned on.

- Voicetron wont work ewerytime when you nead
>>>AJ: Depends on setting (if using REGISTRATIONS - it needs to be on before you save the REGISTER). As of OS 3.0, new edit access to voicetron was implimented - Press and hold down VOCALIZER for 2 seconds to access vocalizer settings. Select (using F1-F10) vocal settin you want. Press EDIT to assign vocalizer response to left or right hand or full piano - then SAVE vocal setting.

-voice in Low.2 is set to 20 in moust cases but is louder then Bass who is set to 40
>>>AJ:- Depends on the voice you are using. Not all voices have the same attack level and this could be true. Bass is usually warmer than say Piano!

-Kayboard cant memorise Solo voice muting in midi file
>>>AJ: This is not a bugg. Mutting Solo voices is considered a LIVE action, one that is carried out as you play the midifile. If you want to do away with the voice completely, bring down it's cooresponding volume to "0" and save as a new Midifile or overwrite the old one if you want this change to be permanent.

-Kayboard cant comunicate with Computer.You cant see or transfer files from PC
>>>AJ: Go to MENU - MIDI - UTILITY and make sure USB MIDI (F6) is OFF. The USB port on the back of the keyboard can be used EITHER for data transfer (off) or midi communication (on) [in place of the MIDI in/out jacks], but NOT for both at the same time!

-To much Effect(Reverb) on some Live drums
>>>AJ: You can remove/reduce the effects on DRUMS by going into STYLE VIEW - LIVE DRUMS (F1) and pressing EFFECTS (U2) and adjust or eliminate all together as the original audio drums are recorded without effects.

-if you call Midi file from mine scren on right site you can see list of your midis.After end of first Midi playing that list is desapire and you can see only blank right site of scren
>>>AJ: Make sure LYRICS (F10) has not been pressed. If you press this, the right side goes black in preparation to disply the lyrics (if available) of the midifile.

-cant coppy style parts
>>>AJ: Download lates OS 4.1b or that found in the USB stick with the new Sounds as this future is available in these!

>>>AJ: Program Voices shown with 2-3 voices (e.g Piano & Strings). Maybe we should have found a better way to label this voice as it gives the impression that both voices are heard through out the entire range, but this is not true. This is set for PIANIST MODE which allows you to play a lead Piano voice on the right and both on the left. If you go into PROGRAM and check out the other voices there, many (especially those with bass) have this feature, together with the Morphing, Steel bend ... etc where voices are heard at different ranges of the keyboard or when the keyboard is played with a certain velocity or ... etc!

RE-INSTALLING SOFTWARE:
You must go into your AUDYA's Hard Drive and delete the Audya401.mem (or any *.mem) file found in the root directory. Then copy the *.mem file from your USB key into the AUDYA's hard drive (root directory) to replace that which you just removed. Power off your AUDYA and press and hold down F10 and UNPLUGGED as you turn it on, and do not release these buttons until you see the AUDYA white screen with update status! During update, make sure you do not power off the keyboard. AUDYA will reset automatically once update is completed!

Hope this helps you and others who might have been experierencing similar issues!

Thanks,

AJ
_________________________
[KETRON - USA]
Design Engineer & Product Specialist.
www.KetronAmerica.com

Top
#35959 - 08/17/10 04:25 PM Re: Few Audya questions
Ketron_AJ Offline
Moderator

Registered: 03/21/01
Posts: 3583
Loc: Middletown, DE
KK-Studio,

The 2nd Voice is controlled directly by the 2nd voice slidder volume on the left. By moving the slidder up and down, it's corresponding value is displayed on the default screen by F7. If you see a value (e.g 50) but still don't hear any sound, it could also be that you are using a voice (e.g soft strings) which has a gradual attack and as such, you will need to keep the key(s) pressed for a while to hear this sound (same is true if this sound is selected as the main/lead sound). Try changing it to e.g brass (a sound with a shart attack to test). Also, if using a PROGRAM Voice, the 2nd voice volume within the program might be turned down - change by pressing PROGRAM - EDIT and U2/7 to change the volume as the volume data here is obtained BEFORE that of the slidder.

Hope this helps.

Thanks,

AJ
_________________________
[KETRON - USA]
Design Engineer & Product Specialist.
www.KetronAmerica.com

Top
#35960 - 08/17/10 09:02 PM Re: Few Audya questions
Tony Hughes Offline
Senior Member

Registered: 01/30/06
Posts: 3944
Quote:
Originally posted by Ketron_AJ:
KK-Studio,

The 2nd Voice is controlled directly by the 2nd voice slidder volume on the left. By moving the slidder up and down, it's corresponding value is displayed on the default screen by F7. If you see a value (e.g 50) but still don't hear any sound, it could also be that you are using a voice (e.g soft strings) which has a gradual attack and as such, you will need to keep the key(s) pressed for a while to hear this sound (same is true if this sound is selected as the main/lead sound). Try changing it to e.g brass (a sound with a shart attack to test). Also, if using a PROGRAM Voice, the 2nd voice volume within the program might be turned down - change by pressing PROGRAM - EDIT and U2/7 to change the volume as the volume data here is obtained BEFORE that of the slidder.

Hope this helps.

Thanks,

AJ


I did tell him to try voices from each bank and he would have discovered what you are saying.
_________________________
Tyros 4/Pair SR 350/ PC with a i8 intel chip, XENYX 802, Ford Focus 2 litre/Tascam DR07/Brother printer/Designjet 500/ our Doris/5 Grandchildren/ white boxers short Kymart shipped over and Typhoo Tea Earl Grey

Top
#35961 - 08/18/10 01:37 AM Re: Few Audya questions
KK-Studio Offline
Junior Member

Registered: 08/13/10
Posts: 30
Loc: Sweden
Quote:
Originally posted by Ketron_AJ:
KK-Studio,

The 2nd Voice is controlled directly by the 2nd voice slidder volume on the left. By moving the slidder up and down, it's corresponding value is displayed on the default screen by F7. If you see a value (e.g 50) but still don't hear any sound, it could also be that you are using a voice (e.g soft strings) which has a gradual attack and as such, you will need to keep the key(s) pressed for a while to hear this sound (same is true if this sound is selected as the main/lead sound). Try changing it to e.g brass (a sound with a shart attack to test). Also, if using a PROGRAM Voice, the 2nd voice volume within the program might be turned down - change by pressing PROGRAM - EDIT and U2/7 to change the volume as the volume data here is obtained BEFORE that of the slidder.

Hope this helps.

Thanks,

AJ


AJ and Tony,
I have tried everything you've said but there must be some else problem.
I'm hoping to get the pen today, hope that helps.

AJ, could you take a listen to my test-piece about the panning hihat? What can cause this panning hihat? Is there maybe a hardware issues?
I've sometimes also have a bug when i start a style, the style is'nt in "sync". They start in different bars if you now what I mean.
The Ketron company said that I've to load a Alltabs-file in the system but that did'nt fix the issue.

Top
#35962 - 08/18/10 10:19 AM Re: Few Audya questions
Tony Hughes Offline
Senior Member

Registered: 01/30/06
Posts: 3944
KK,

Does the led on the 2nd voice button stay on when you press it down once. Just a thought. I think like you say you may well have another problem

Tony
_________________________
Tyros 4/Pair SR 350/ PC with a i8 intel chip, XENYX 802, Ford Focus 2 litre/Tascam DR07/Brother printer/Designjet 500/ our Doris/5 Grandchildren/ white boxers short Kymart shipped over and Typhoo Tea Earl Grey

Top
#35963 - 08/18/10 10:46 AM Re: Few Audya questions
Dusan Offline
Member

Registered: 05/04/09
Posts: 559
Loc: Slovenija
Quote:
Originally posted by KK-Studio:
AJ and Tony,
I have tried everything you've said but there must be some else problem.
I'm hoping to get the pen today, hope that helps.

AJ, could you take a listen to my test-piece about the panning hihat? What can cause this panning hihat? Is there maybe a hardware issues?
I've sometimes also have a bug when i start a style, the style is'nt in "sync". They start in different bars if you now what I mean.
The Ketron company said that I've to load a Alltabs-file in the system but that did'nt fix the issue.


KK
what are you mean with words:Iveto load a Alltabs-file.Can you explain bether?

Top
#35964 - 08/18/10 10:53 AM Re: Few Audya questions
KK-Studio Offline
Junior Member

Registered: 08/13/10
Posts: 30
Loc: Sweden
Quote:
Originally posted by Dusan:
KK
what are you mean with words:Iveto load a Alltabs-file.Can you explain bether?


Dusan, this is what Ketron said to do:

"Try to reload alltabs.tab file located on TABLE ( Hard disk )

On Hard disk of Audya select System/ Factory/Table ..then you’ll see Alltabs.tab…select that and press Enter .After a couple of minutes will be completed .Turn off and On"

But that did'nt help, I still get sync errors.

And yes, the led on the 2nd voice stays on when I press it once.

Top
#35965 - 08/18/10 11:15 AM Re: Few Audya questions
Dusan Offline
Member

Registered: 05/04/09
Posts: 559
Loc: Slovenija
Quote:
Originally posted by KK-Studio:
Dusan, this is what Ketron said to do:

"Try to reload alltabs.tab file located on TABLE ( Hard disk )

On Hard disk of Audya select System/ Factory/Table ..then you�ll see Alltabs.tab�select that and press Enter .After a couple of minutes will be completed .Turn off and On"

But that did'nt help, I still get sync errors.

And yes, the led on the 2nd voice stays on when I press it once.


KK,
with so litle sugestion is hard to solve some problems.I am disaponted cos Ketron dont respond properly about that cinde of trouble.I am so sorry for you.
Like you maby allredy know i haw a problem with USB conection to PC.Cant fined an solucion haw to fiks that problem and the wors thing is cos I haw no person to asck for help.....
Good lack to you my friend.
PS
I forget to thell you:your file sound so good to me.You are a good musician.

Top
#35966 - 08/18/10 01:15 PM Re: Few Audya questions
KK-Studio Offline
Junior Member

Registered: 08/13/10
Posts: 30
Loc: Sweden
Quote:
Originally posted by Dusan:
KK,
with so litle sugestion is hard to solve some problems.I am disaponted cos Ketron dont respond properly about that cinde of trouble.I am so sorry for you.
Like you maby allredy know i haw a problem with USB conection to PC.Cant fined an solucion haw to fiks that problem and the wors thing is cos I haw no person to asck for help.....
Good lack to you my friend.
PS
I forget to thell you:your file sound so good to me.You are a good musician.



Thank you, but that was just an unfinished recording. Had to stop that because I heard the panning hihat.

Here is my first finished backing track on Audya: http://www.box.net/shared/7vzo97kvdr

I feel sorry for you guys who bought their Audya for full price, and still got issues. I got lucky and got mine second hand for under half newprice. All I want, is to get mine fixed before the warranty runs out (3months left).

And fozzie, what's your email? Would be nice to know someone in Sweden with the Audya.

I'm while writing, loading the Sound Upgrade! Will be back for my opinion later....

Top
Page 2 of 4 < 1 2 3 4 >

Moderator:  Admin, Kerry, Ketron_AJ, Tonewheeldude 



Help keep Synth Zone Online