SYNTH ZONE
Visit The Bar For Casual Discussion
Page 2 of 2 < 1 2
Topic Options
#33245 - 04/10/03 07:56 PM Re: How do u HOLD the LHS volume on X1?
DanO1 Offline
Senior Member

Registered: 01/31/01
Posts: 3602
Loc: Maryland
Quote:
Originally posted by Mosiqaar:
Dano, I think you totally are missing my question.

I am using Patterns on my X1.

When I turn on my X1, the LHS volume is set to 63. I set it to 53 and I do the SAVE/ENTER under a registration. When I pull that particular registration up after turning on the X1, the LHS volume (the volume of the entire arranger section) does go to 53...BUTTTTT as soon as I pick another pattern, it goes back up to 63 and stays there regardless of which pattern I chose.

How do I make my arranger section volume stay at 53 for the LHS?

thanks Dano and all



With the pattern expansion , you could organize up to 200 patterns in a row .

So instead of using registrations, take the styles your trying to save as registrations and globally copy them as a NEW pattern .

Press Edit pattern , select new , name the pattern , confirm , press copy , press F1 and use balance value buttons to scroll to the style you wish to edit .


Once the style is created as a new style , make the volumne control adjustments etc ...
And press save enter , F2 for styles and F10 .

If this doesn't work , email Sandro

Dano


PS....If your X1 does nto have the pattern expansion , you will be capiable of placing up to 30 to 50 patterns .
_________________________
dansmusicgear@aol.com
https://www.reverbnation.com/danoneil?profile_view_source=profile_box

Top
#33246 - 04/14/03 06:59 PM Re: How do u HOLD the LHS volume on X1?
Mosiqaar Offline
Member

Registered: 12/01/01
Posts: 999
Loc: Atlanta, GA, USA
Dano, thanks for your efforts, but I already have 200 patterns loaded, so I don't have room to be copying patterns, cause I dont have empty slots.

Plus, I dont want to have to edit 200 patterns simply to be able to set the arranger section volume to a certain level. I thought that one of the parameters controlled by the Registrations is the LHS volume (the arranger volume). Indeed, when I do call up the registration, it does change the LHS volume from 63 (when X1 is turned on) to 53. The problem is, as soon I chose a new pattern the LHS volume goes back to 63, and stays there for all patterns to come. so obviously some how it is locked at 63, only if I can change the value, that would be nice!
_________________________
Samer

Top
#33247 - 04/15/03 12:37 AM Re: How do u HOLD the LHS volume on X1?
Ketron_AJ Offline
Moderator

Registered: 03/21/01
Posts: 3583
Loc: Middletown, DE
Mosiqaar,

Sorry I missed this all together:

From the default screen, proceed as follows:

* Press UTILITY
* Go to Page 2/3
* Press Registr Mode (F3)
* Make sure ARRANGER MODE = OFF
* SAVE new Registration settings (F7)
* Return to default screen -
* Adjust Lower volumes to your wish.
* Press SAVE/ENTER button save-REGISTRATION (this will be REG01).
* EXIT and return to default screen.
* Now (with same volume settings), press SAVE/ENTER and SAVE POWER ON SET UP.

When next you turn on your keyboard, it should default to the new vol. settings.

PS: The above holds true only for Registrations (as per your initial request way up above). If you are switching from one STYLE/PATTERN to another and still want the Lower volume leves the same (eg 23), you will have to make the modifications to the Lower volumes within the PATTERN, that is set the LOWER volumes to 23, press SAVE/ENTER and PATTERN to save the new Pattern volume levels; then proceed to adjust the next Pattern etc.

Thanks and again sorry for delay,

AJ


[This message has been edited by Ketron_AJ (edited 04-15-2003).]
_________________________
[KETRON - USA]
Design Engineer & Product Specialist.
www.KetronAmerica.com

Top
#33248 - 04/15/03 07:26 AM Re: How do u HOLD the LHS volume on X1?
DanO1 Offline
Senior Member

Registered: 01/31/01
Posts: 3602
Loc: Maryland
AJ ...............I LOVE YOU MAN !
_________________________
dansmusicgear@aol.com
https://www.reverbnation.com/danoneil?profile_view_source=profile_box

Top
#33249 - 04/16/03 08:06 PM Re: How do u HOLD the LHS volume on X1?
Mosiqaar Offline
Member

Registered: 12/01/01
Posts: 999
Loc: Atlanta, GA, USA
Thanks AJ, I will try your above procedure and see if it works. The only thing I had not tried from ur list above is to SAVE/ENTER power on setup.

Please read my comments in the oriental forum on this topic.
Its not that I want volumeSSS to be fixed, its just the LHS volume which is on the screen right blew the RHS volume. It is changed using the + - buttons right below TRANSSPOSE. Its one value the lowers or highers the entire arranger section loudness. That is what I want to HOLD.

Thanks
_________________________
Samer

Top
#33250 - 05/11/03 02:36 PM Re: How do u HOLD the LHS volume on X1?
Ketron_AJ Offline
Moderator

Registered: 03/21/01
Posts: 3583
Loc: Middletown, DE
Mosiqaar,

I understand your question. You would like to be able to change from one PATTERN to another and have the LEFT Volume level stay constant. This cannot be done without manually changing the volume level within the style ... and here is why.

When you program a style, you have different volume settings within that style for different instruments. Now depending on the velocity/after-touch level that was set by the style programmer when the style was being recorded, level 24 (e.g.) in one PATTERN may sound louder or lower than the same level set within another pattern (instruments used may also change this). That is to say even if we were able to freeze the LEFT volume, you would still notice volume changes as you changed from one style to another so we opted not to install this function to be more realistic.

Hence to set the volume leves constant for:

PATTERNS:- Go through each Pattern and adjust the volume such that whenever that Pattern is called, the LEFT level stays constant.
STYLES:- Use the CUSTOM styles (images of the ROM styles) to do the changes and SAVE new volume settings.


Hope this better explains.

Thanks,

AJ.
_________________________
[KETRON - USA]
Design Engineer & Product Specialist.
www.KetronAmerica.com

Top
Page 2 of 2 < 1 2

Moderator:  Admin, Kerry, Ketron_AJ, Tonewheeldude 



Help keep Synth Zone Online