When I put in a registration the reverb is at 46 level I then change it but it comes back to 46 the next time I turn the SD1 on
Question is How do I save the reverb level.

Hey!
Which reverb level...for right hand,for style instruments ,vocalist or drums?
Vio

press save enter and f3 for power on set up, see if that works ...

Hey Emmett

I just finished the experimentings...so

You can adjust reverb ,delay ,Eq and volumes via Vocalizer sets.

To do that you should follow this steps:

1.turn on the keyboard

2.push 'On line effects'

3.Go to 'Vocal set' and choose let's say voc1

4.exit

5.Go to 'Vocalizer Edit' ...far right buttons

6.In the edit menu..do whatever you need..reverb,delay,volume and Eq for direct and vocalizer signals.Also you can choose how the vocalizer works...left,right hand,midi...so on

7.Go to "Save-Enter" ...left button from the screen

8.Save vocalizer set with the same or different name.

9.exit

10.make all the registration things, style,patches...and don't forget to choose in the "Online effect " menu the Vocalizer set you just save

11.Save registration and everytime you want that registration , just call it and you'll have everything ready...

Also, with the power on setup,you can save the configuration last on the keyboard and when you put the machine ON..it will start with all the settings right the way you want it.Like a really stage memory mixer.

If you make different Voc sets you can even have different mixings for different songs...iyt's absolutlly amazing how much can you do with this machine!!

That's cool...

Anyway check out the manual ,'cause there is for sure about all this things