SYNTH ZONE
Visit The Bar For Casual Discussion
Topic Options
#304741 - 01/28/06 05:56 PM A handy way to test your Yammi.....!!
mdorantes Online   content
Senior Member

Registered: 11/25/00
Posts: 1114
Loc: Phoenix, Arizona
This is a "test mode" for most PSRs, Tyros, Clavinovas, Electones, is way to find if something is really WRONG with your Yamaha.
Before you turn on the instrument, in the second octave (from low to high), if is a PSR put C# chord (C#-F-G#) and hold it while turn in ON...(If it is an Electone, do the same but in the lower Keyboard), now when in that mode, with the TEMPO arrows <> go to parameter to check, then with the START(style), execute that particular task, when finishing that, simply push start again to get out, and proceed to the next parameter to check, and repeat as necesary, to get off of that function, just turn off the keyboard and back on.
When test the midi, you must conect a midi cable from de midi out to the midi in...yes, to make a loop.
Do not over use this mode, is design to be use by the service autorized people by Yamaha.
_________________________
mdorantes

Top
#304742 - 01/29/06 07:35 AM Re: A handy way to test your Yammi.....!!
trtjazz Offline
Member

Registered: 08/01/02
Posts: 2683
Thanks for the info it's good to know.
Terry

------------------
jam on,
Terry
http://www.musicchops.com/forums/
_________________________
jam on,
Terry
http://www.artisans-world.com/

Top
#304743 - 01/29/06 09:02 AM Re: A handy way to test your Yammi.....!!
BEBOP Offline
Senior Member

Registered: 01/02/00
Posts: 3767
Loc: San Jose, California
thank you kindly. I have printed and saved this info on my hard drive for future use.
Bebop
_________________________
BEBOP

Top
#304744 - 02/05/06 04:16 PM Re: A handy way to test your Yammi.....!!
flatfoot Offline
Member

Registered: 06/17/03
Posts: 118
Loc: sacramento CA
I tried this on my DGX and it worked.

Top

Moderator:  Admin 



Help keep Synth Zone Online