SYNTH ZONE
Visit The Bar For Casual Discussion
Topic Options
#234496 - 05/18/08 07:38 PM Transpose Button has me Crazy
bruno123 Online   content
Senior Member

Registered: 06/04/02
Posts: 4912
Loc: West Palm Beach, FL 33417
Since the screen reads “O” transpose I find the keyboard playing 1 ½ tones lower with one set of eight registrations. It works correctly on the first set of eight registrations.

1-The registration memory has Transpose selected in both cases.
2-The control for transpose is set on Master control.

I do understand a Transpose button but not this one. It reads “O” transpose that should say it all.

Could use help, Thanks, John C.

Keyboard S900

Top
#234497 - 05/18/08 08:47 PM Re: Transpose Button has me Crazy
mdorantes Offline
Senior Member

Registered: 11/25/00
Posts: 1210
Loc: Queretaro, Mexico
Hello Bruno, in the Mixing console, in the Third Page, "Tune"
in the Left Lower part of the screen, you will see Transpose, and Under, Master/Song/KBD . I am almost certain that you have -3 in the KBD.....Press BOTH #3 arrows (Up & Down) together that will return it to "0". That should take care of your issue.

Manuel Dorantes
Phoenix Az
_________________________
mdorantes

Top
#234498 - 05/18/08 08:52 PM Re: Transpose Button has me Crazy
mdorantes Offline
Senior Member

Registered: 11/25/00
Posts: 1210
Loc: Queretaro, Mexico
I forgot to mention that when you make your registrations, make sure that you PREVIOUSLY have selected what you want to be included in the registration, make sure you "De-select" the Transpose.
ALso, if someone gave you a registration and you are using it, you may see that is NOT selected the "Transpose" you simply Re-select or de-select the functions/parameters you want save and "RE-SAVE" EACH of the registrations and of course, save it again in the Registration Bank. That way will not experiment what you have so far.
Hope it helps.

Manuel

------------------
mdorantes
_________________________
mdorantes

Top
#234499 - 05/20/08 03:04 AM Re: Transpose Button has me Crazy
bruno123 Online   content
Senior Member

Registered: 06/04/02
Posts: 4912
Loc: West Palm Beach, FL 33417
Quote:
Originally posted by mdorantes:
Hello Bruno, in the Mixing console, in the Third Page, "Tune"
in the Left Lower part of the screen, you will see Transpose, and Under, Master/Song/KBD . I am almost certain that you have -3 in the KBD.....Press BOTH #3 arrows (Up & Down) together that will return it to "0". That should take care of your issue.

Manuel Dorantes
Phoenix Az


Hi Manuel,
I now understand the problem, thanks, you have saved my day.

It is people like you that make this forum what it is.

Thanks again, John C.

Top

Moderator:  Admin, Diki, Kerry 



Help keep Synth Zone Online