Tony M
I picked up a extra garage door handle (free) from the overhead door company,(matter of fact they gave me a whole sackfull, they work great on lots of things) and attached it just a tad forward of center on the top of the sub. (don't get any closer than 4" of the front), that clears the speaker from possible sawdust droppings). If you do this you need to predrill the two holes and be carefull not to get any sawdust inside, (your drilling thru 3/4" particle board so stop the drill when your barely through). I used two 3/16 X 7/8 long lag bolts, and a wood tapered drill bit a tad smaller than 3/16". (very secure and easy to carry). the handles are left overs from the inside of garage doors,not needed with auto openers. Can be pre/painted. I think Gary uses a weblike sling which works fine,but this way is one less item to worry about.I would not consider using bolts instead of the lag screws, you'd have to take off the back (a zillion screws and its double sided tape sealed, you could cause a rattle if not careful).....Cheers .....pose
[This message has been edited by loungelyzard (edited 01-16-2006).]
_________________________
Support the arts
FEED a Musician
Cheers....Pose
Previous Topic
Index