I'm not sure what other settings maybe affected when Part 1-16 is off, but for sure the sounds won't change. Something to experiment with.

However...

For some reason, the assigned sounds R1/R2/Left will change when Part 1-16 is turned off when panel memory is used. I don't know why, and was hoping Technics Player would be kind enough to shed some light.

Experiment:
Make sure Part 1-16 filter is off.
In the Mixer Screen, set R1 with Flute, and set the last track (16) also with Flute, and save this on PM1. While still viewing the Mixer screen, press PM2. Track 16 should still have the Flute (expected). But R1 will change (not expected). Don't understand that.

You can reverse this to check out what Part 1-16 does when turned on. In which case, PM1 track 16 will have Flute, after pressing PM2 track 16 will show a different sound, default Piano maybe.

One thing to keep in mind when Part 1-16 is off. Make sure you start out with the desired sound. Ex: If you started out on PM2 setting with track 16 having a piano, with Part 1-16 off, it will keep the piano. So make sure of your starting point.

AnthonyC


[This message has been edited by AnthonyCian (edited 04-25-2006).]