Each Panel Memory (PM) will store the sound that is set for the tracks. Let's say PM #1 is set with Track 16 having a Flute. Let's say PM #2 Track 16 Sound was never set. When PM #2 is used, Track 16 will then switch and play the default piano sound. If PM #1 is pressed again, then Track 16 will revert back to the flute.

There's Hope!

Check your PM Expand Mode Filters (Page 2) and see if you have the filter Part 1-16. The PR804 has this filter. The assigned sounds for the tracks will not change during PM changes when this filter is turned OFF. But ONLY from Tracks 4-16. I don't know if your model has that filter. But worth a look see. Turning this filter Off may affect other Part 1-16 related settings and may not be limited to just the assigned sound.

Technics Player:
Are you out there? Are you familiar with the PM filter Part 1-16? If so, why doesn't it lock the assigned sounds for R1/R2/Left? It does start with 1?

No mater what I do, R1/R2 and Left will always change the assigned sounds during PM changes when Part 1-16 filter is set to OFF. Even when the Sequencer Presets are changed to GM Multi Recording and Technics Multi Recording.

Thanks,

AnthonyC

[This message has been edited by AnthonyCian (edited 04-24-2006).]