Kevin,
Proceed as follows ...

* Press MENU
* Press OUTPUT ASSIGN (F5).
* Press F1 (Out 3&4) and select the component with the up and down data arrow buttons and use the < and > data buttons to to assign the component highlighted to MAIN/STEREO or Output 3 and 4..
* Press F3 (Out 1&2) and repeat as above. Change U1 to Out 1&2 Mono so you have more options to send some components out of output 1 and others out of output 2. Again, the center of the screen will display what can be assigned to these outputs or the MAIN outputs.
* Press F2 (Out 1&2 Drums - Drum Outputs) and select which outputs you want which individual drum parts going out of (out1, out 2 and main outputs are your options).

When done, press SAVE U5/10.

Exit from here into the default screen.

Press SAVE and CUSTOM STAART UP (F6) to save so you don't have to repeat this procedure each time you power on your unit.

Hope this helps.

Thanks,

AJ