Hi,

Welcome to the Synth Zone General Arranger Forum TeeRoget'.

To trigger a fill on the PSR 2000 you will first need to have a Pedal (foot control) that is compatible with the PSR 2000. Once you have a compatible Pedal then it is simple. Put the end of the Pedal plug into Pedal slot #2 on the back of the PSR 2000. (I am assuming that you are already using a 'sustain' or 'expression' pedal for slot #1). Once you have inserted the end into slot #2 then turn the PSR 2000 ON and go into the "Function" setting. Then hit "D" to go into the Controller menu. Once in the Controller menu make sure you are viewing the the Pedal setting screen. Use the Back/Next arrows at the top right of the LCD screen to get into the Pedal setting screen if necessary. Use the A/B buttons at the top left of the LCD screen to choose settings for either Pedal #1 or Pedal #2. Using the (1) up/down arrows right under the bottom left side of the LCD screen, and scroll down the various pedal function settings until you come to "Fill Self". Choose "Fill Self" OR "Fill Break" depending on your preference for the type of fill you want to trigger. Exit the Menu and return to the Main Screen. Now when you depress the Pedal the "Fill Self" function will engage and will trigger a fill. PS: If you keep the Pedal depressed, the fill with loop continuously.

Hope this helps..

Best,
Mike