Squeak,
On Ty3 when you first go to a screen (say Style voices) if the slider position does not correspond to say the actual volume that is shown on the screen graphic, the first time you move the slider there will be a jump.
In the extreme case if actual vol=127 and slider position = zero the first time you touch the slider the vol.jumps down to close to zero. So if you want 100 you can't go from 127 to 100. The route becomes 127 to about zero to 100.
Once all sliders are synchronised they will stay so - as long as you stay in that screen and don't get them out of synch again eg. by by altering buttons. Change to a different screen, alter sliders and come back, or change to a different style and they will be out of synch again to a varying extent.
This comes about because the only way the sliders move is by hand - no servo to keep them mechanically in synch
Thinking about it, it might have been better if the software only started actioning level changes once the slider position is moved to the current level - that way involuntary jumps wouldn't happen at least.

John

[This message has been edited by jwyvern (edited 11-16-2008).]