I've been setting up the Roland G70 with the Bose L1 and ran into a SERIOUS phase cancellation problem.
When I run left and right outputs to two inputs on the Bose, both high and low-end cancellation occurs, bigtime.
This was not a problem on the Tyros 2.
However, when I run from the L/R combo output from the G70 into one channel on the Bose, it sounds terrific. with no loss of anything. Organ still turns, the effects seem to work fine.
So maybe it isn't a problem, since I only have to use one cable and now have 3 channels available on the Bose.
Tonight is the first test under fire. Cross your fingers for me!
The T2 is on its way to Tony Rome's house.
DonM