Visit The Bar For Casual Discussion
Page 2 of 2 < 1 2
Topic Options
#60015 - 02/01/05 06:36 AM Re: Looking for used KN2000/1200/1400/1600

Hi Smithy.
I have a KN2000,and I would not part with it.Alec says it was a ground breaker,he never spoke a truer word.I have gigged it for the past 12 years.It has never let me down. Exept once, it was a fault on the disk drive.I cleaned the belt and capstan drive,that stopped the belt slipping,and the fault cured.I have a friend in london.
He has three could ask him.I think he might sell you one,you could then go and see it,see if it is what you want. His email address.

#60016 - 02/06/05 05:04 AM Re: Looking for used KN2000/1200/1400/1600
Smithy Offline
Junior Member

Registered: 07/06/03
Posts: 17

I just wanted to thank everybody for their kind help - I've managed to P/X the KN920 for a 1600, for 200 plus the 920, with the kind help of Whitley Bay Organ Centre.

The 1600 should suit my needs as I can load the childrens work will load into the 7000, and also for my personal work, I can load the 3000 stuff into the 1600 (The 901 will load into the 3000 so that creates the final link!)

I know a fair bit about technica keyboards but I wouldn't have made the right decision without your help, so it's much appreciated!

#60017 - 02/06/05 09:20 AM Re: Looking for used KN2000/1200/1400/1600
technicsplayer Offline
Senior Member

Registered: 01/17/02
Posts: 3319
excellent, you're welcome

Page 2 of 2 < 1 2

Moderator:  Admin 

Help keep Synth Zone Online