SYNTH ZONE
Visit The Bar For Casual Discussion
Page 1 of 2 1 2 >
Topic Options
#56178 - 04/14/05 09:43 AM Sequencer -Real time
dpeisic Offline
Member

Registered: 12/19/04
Posts: 165
Loc: San Deigo, Ca, USA
Hello all,

On KN7000 at the Sequencer REAL TIME

Say I choose the following channels to be recorded with the following voices

RT1 - Piano

RT2 - violin,

LFT - accordion

CHD - Waltz

CTL

After I finish playing I press Rec Stop.

Now I can play it back. And I want to play along with my recording with a different voice say I want to play with organ in addition to the existing recording mentioned above

When I change RT1 to organ, the piano from my recording has changed to organ. So I cannot have the organ voice played in addition to the previous recording voices (Piano and violin).

Is there any way to lock the RT1 piano, RT2 violin that I previous recorded? So that when I play back the recording and change RT1 to organ, the organ voice want change the piano voice that I had when I recorded it?

Thanks for you time,
Doron
_________________________
Doron Peisic

Top
#56179 - 04/14/05 11:16 PM Re: Sequencer -Real time
bassclef Offline
Member

Registered: 07/03/03
Posts: 31
Loc: Melbourne, Australia
I usually leave channels RT1 and RT2 vacant and therefore available to the keyboard for real time playing.
There could well be a better way to overcome the problem. Maybe someone else can tell us how.

bassclef

Top
#56180 - 04/15/05 12:22 AM Re: Sequencer -Real time
technicsplayer Offline
Senior Member

Registered: 01/17/02
Posts: 3319
sequencer, copy & paste, track copy, 1 to 9, ok.
exit, track clear, 1 RT1, ok.
exit, exit, record & edit, track assign, tr9 to part 5.
exit out.

Top
#56181 - 04/15/05 05:46 PM Re: Sequencer -Real time
dpeisic Offline
Member

Registered: 12/19/04
Posts: 165
Loc: San Deigo, Ca, USA
Thanks you all for taking the time to respond,

I am going to further explore it with your additional information.

Cheers,
Doron
_________________________
Doron Peisic

Top
#56182 - 04/19/05 05:06 PM Re: Sequencer -Real time
dpeisic Offline
Member

Registered: 12/19/04
Posts: 165
Loc: San Deigo, Ca, USA
Hello every one,

I tried the instruction above. The following questions rose.


1. When Track Copy, Do I copy from the song that I just loaded say song 1 to the same song (song 1) or to a new song?

My song 1 appears as 1 A (A latter is added) is there any reason for it?

I copied to the same song and to different song, and I did not succeed.

When trying to track assign the tr9 to part 5 the Tr9 was already assign to the part5. It is also asked you to choose from the left menu. I chose initial. Otherwise you cannot go forward with the OK. Which selection should I choose (there are 3 options)?

Thanks,
Doron
_________________________
Doron Peisic

Top
#56183 - 04/20/05 06:44 AM Re: Sequencer -Real time
technicsplayer Offline
Senior Member

Registered: 01/17/02
Posts: 3319
copying to another song will mean some tracks in one song and other tracks in another song. Since this would be useless to anybody trying to play along with a specific song, it should be pretty obvious that all tracks need to be in the same song besides there was no mention anywhere of changing songs.
If Tr9 is still assigned to Part5, it just means you have not followed the instructions properly to copy RT1 into the correct track - perhaps not even into the correct song!

Top
#56184 - 04/20/05 04:09 PM Re: Sequencer -Real time
dpeisic Offline
Member

Registered: 12/19/04
Posts: 165
Loc: San Deigo, Ca, USA
Hi,

I found my mistake. I copied track 1-9 to track 1-9 respectively. Instead of coping track 1 to track 9. I misinterpreted, and I apologize for it.

I want to acknowledge that it works perfectly with the instruction above, Thanks bunch!

As I got more excited about the sequencer capability, I noticed at Sequencer/Real Time, the Tr7 RHY couldn’t be changed to recording. Is there any reason, and for what the tr7 RHY is used?

What are the differences between RHY and APC?

Thanks,
Doron
_________________________
Doron Peisic

Top
#56185 - 04/21/05 01:48 AM Re: Sequencer -Real time
technicsplayer Offline
Senior Member

Registered: 01/17/02
Posts: 3319
excellent you can repeat as many times as there are spare tracks to build up the song now. RHY can be changed in track assign - you just have to OK that change. APC is real time record whereas RHY is for step record.

Top
#56186 - 04/21/05 07:36 PM Re: Sequencer -Real time
dpeisic Offline
Member

Registered: 12/19/04
Posts: 165
Loc: San Deigo, Ca, USA
Thanks all for the tremendous support.

Cheers,
Doron
_________________________
Doron Peisic

Top
#56187 - 04/21/05 08:54 PM Re: Sequencer -Real time
dpeisic Offline
Member

Registered: 12/19/04
Posts: 165
Loc: San Deigo, Ca, USA
Now I almost always get piano sound on track 9 regardless what I originally had on tr1 before I copied tr1 to tr9. Am I missing any thing?

Thanks,
Doron
_________________________
Doron Peisic

Top
Page 1 of 2 1 2 >

Moderator:  Admin 



Help keep Synth Zone Online