SD4 Question | Ketron Forum | Synth Zone Forums

SYNTH ZONE

Visit The Bar For Casual Discussion

You are not logged in. [Log In] Synth Zone » Forums » The Arranger Keyboard Forums » Ketron Forum » SD4 Question

Page 2 of 3

2

Topic Options

#467229 - 03/08/19 09:11 AM Re: SD4 Question [Re: Bernie9]
DAN.2000 Senior Member Registered: 08/09/01 Posts: 1134 Loc: FRANCE	Mmm.... As far I remember, the version 1.32 is important to correct USB bugs with the SD4 that was working good on Windows XP but not with Windows 7 It was an update asked by me directly to Ketron italy, to correct some important bugs I also remember that when you upgrade the SD4, it never says that it is finished, but in fact after few minutes, you can check the version and it is well updated Edited by DAN.2000 (03/08/19 09:12 AM) _________________________ Regards, Dan https://www.varranger.com
Top

#467235 - 03/08/19 11:23 AM Re: SD4 Question [Re: DAN.2000]
Torch Member Registered: 12/17/12 Posts: 770	Ketron's web site shows only v 1.30. I found this this vArrnager thread concerning the SD4 USB issue. https://www.varranger.com/vforum/index.php?topic=209.0 Dan has a MIDI test file to test the SD 4 USB midi connection. V 1.30 does have a USB issue. Dan has done a great job with patch mapping/layering for the SD4. Now where can I find v 1.32? My SD4 has 1.30. Does that mean I have to update it to 1.31 before 1.32? Edited by Torch (03/08/19 11:29 AM) _________________________ "You Shall Know the Truth, and the Truth will set you free." John 8:32
Top

#467241 - 03/08/19 12:22 PM Re: SD4 Question [Re: Bernie9]
Bernie9 Senior Member Registered: 09/21/02 Posts: 5546 Loc: Port Charlotte,FL,USA	If you use the midi port, like I always did with my SD4, it worked well. So, unless I am reading this wrong, the only problem is with the USB port. _________________________ pa4X 76 ,SX900, Hammond SK1, Ketron SD40,Ketron Event X Centerpoint Space Station, Bose compact
Top

#467244 - 03/08/19 12:28 PM Re: SD4 Question [Re: Bernie9]
hammer Senior Member Registered: 01/27/08 Posts: 2414 Loc: Texas	Bernie, When I got both the SD90 and the SD40 I discovered something strange. The SD90 would NOT power a keyboard using a USB port and It required the 5 Pin midi cable to work. I tried it with several midi controllers and AJ confirmed the SD90's USB ports did to supply enough power to power a keyboard. The SD40 does power a keyboard using the USB port. I don't know what this has to do with this thread but thought it might be of interest to some. Deane
Top

#467248 - 03/08/19 01:40 PM Re: SD4 Question [Re: hammer]
Torch Member Registered: 12/17/12 Posts: 770	Originally Posted By hammer Bernie, When I got both the SD90 and the SD40 I discovered something strange. The SD90 would NOT power a keyboard using a USB port and It required the 5 Pin midi cable to work. I tried it with several midi controllers and AJ confirmed the SD90's USB ports did to supply enough power to power a keyboard. The SD40 does power a keyboard using the USB port. I don't know what this has to do with this thread but thought it might be of interest to some. Deane Will a powered USB hub work on your SD90? _________________________ "You Shall Know the Truth, and the Truth will set you free." John 8:32
Top

#467249 - 03/08/19 01:43 PM Re: SD4 Question [Re: Bernie9]
Torch Member Registered: 12/17/12 Posts: 770	Originally Posted By Bernie9 If you use the midi port, like I always did with my SD4, it worked well. So, unless I am reading this wrong, the only problem is with the USB port. You're right; it is the USB midi connection. It will be convenient to be able to use one single USB midi cable for MIDI in and out. If I remember it correctly, the USB on the SD 4 actually offers two separate USB MIDI ports as it is a two SD2s in it after all. _________________________ "You Shall Know the Truth, and the Truth will set you free." John 8:32
Top

#467250 - 03/08/19 01:56 PM Re: SD4 Question [Re: Bernie9]
Bernie9 Senior Member Registered: 09/21/02 Posts: 5546 Loc: Port Charlotte,FL,USA	Thanks for the confirmation. I don't remember about the USB ports as I never used them. _________________________ pa4X 76 ,SX900, Hammond SK1, Ketron SD40,Ketron Event X Centerpoint Space Station, Bose compact
Top

#467252 - 03/08/19 02:13 PM Re: SD4 Question [Re: Bernie9]
hammer Senior Member Registered: 01/27/08 Posts: 2414 Loc: Texas	Torch, I now longer have the SD90 and did not try a powered USB hub with it. I replaced it with the SD40 so the USB cable would work and I would not have to carry around an extra power brick and cable. Deane
Top

#467317 - 03/10/19 04:42 PM Re: SD4 Question [Re: hammer]
Torch Member Registered: 12/17/12 Posts: 770	What a shame that the flagship model has a bug like that. I haven't connected my SD40 to PC, but it's good to know that it works fine. _________________________ "You Shall Know the Truth, and the Truth will set you free." John 8:32
Top

#467350 - 03/11/19 11:04 AM Re: SD4 Question [Re: Bernie9]
synerjim Member Registered: 10/27/03 Posts: 526 Loc: CA	My SD90 powered my MIDI controllers thru USB ports without any issue. _________________________ Jim SD90,Korg I3, KMA Liverpool,TC Helicon Play Electric, Fender Sonoran Guitar, vArranger, Bose S1 Pros, Bose L1 Compact, Aiwa Exos-9
Top

Page 2 of 3

2

View All Topics

Hop To:

Moderator: Admin, Kerry, Ketron_AJ, Tonewheeldude

Help keep Synth Zone Online