SYNTH ZONE
Visit The Bar For Casual Discussion
Page 1 of 2 1 2 >
Topic Options
#37319 - 11/07/10 03:56 PM Attention Tony Hughes
Robbo Offline
Member

Registered: 07/31/08
Posts: 566
Loc: Ballarat, Victoria, Australia
Hi Tony,

wonder if you can e-mail me that PPoint pres on opening the Audya, particulary the info on the bendy screwdriver, can't seem to find it in catalouges here?, but also the other advice as well. Need to open and tighten those connections, should have done it from the start.

Robbo

Top
#37320 - 11/07/10 11:40 PM Re: Attention Tony Hughes
Dusan Offline
Member

Registered: 05/04/09
Posts: 558
Loc: Slovenija
Robbo,
is not much to do in open Audya,but befor open your instrument,maby is good to look my pictures.
Procedur to opening Audya is eassy.On the bottom of cover is for screws,who you can easy remove with cros screwdriver,but much dificult is two screws under kays on the front of instrument.
Good lack

Link:http://www.box.net/shared/uftac8jns3

Top
#37321 - 11/07/10 11:41 PM Re: Attention Tony Hughes
Tony Hughes Offline
Senior Member

Registered: 01/30/06
Posts: 3930
Quote:
Originally posted by Robbo:
Hi Tony,

wonder if you can e-mail me that PPoint pres on opening the Audya, particulary the info on the bendy screwdriver, can't seem to find it in catalouges here?, but also the other advice as well. Need to open and tighten those connections, should have done it from the start.

Robbo


Robbo

You have mail!!!!!!!!!!

Tony
_________________________
Tyros 4/Pair SR 350/ PC with a i8 intel chip, XENYX 802, Ford Focus 2 litre/Tascam DR07/Brother printer/Designjet 500/ our Doris/5 Grandchildren/ white boxers short Kymart shipped over and Typhoo Tea Earl Grey

Top
#37322 - 11/07/10 11:41 PM Re: Attention Tony Hughes
Tony Hughes Offline
Senior Member

Registered: 01/30/06
Posts: 3930
Quote:
Originally posted by Robbo:
Hi Tony,

wonder if you can e-mail me that PPoint pres on opening the Audya, particulary the info on the bendy screwdriver, can't seem to find it in catalouges here?, but also the other advice as well. Need to open and tighten those connections, should have done it from the start.

Robbo


Robbo

You have mail!!!!!!!!!!

Tony
_________________________
Tyros 4/Pair SR 350/ PC with a i8 intel chip, XENYX 802, Ford Focus 2 litre/Tascam DR07/Brother printer/Designjet 500/ our Doris/5 Grandchildren/ white boxers short Kymart shipped over and Typhoo Tea Earl Grey

Top
#37323 - 11/07/10 11:44 PM Re: Attention Tony Hughes
Tony Hughes Offline
Senior Member

Registered: 01/30/06
Posts: 3930
Quote:
Originally posted by Dusan:
Robbo,
is not much to do in open Audya,but befor open your instrument,maby is good to look my pictures.
Procedur to opening Audya is eassy.On the bottom of cover is for screws,who you can easy remove with cros screwdriver,but much dificult is two screws under kays on the front of instrument.
Good lack

Link:http://www.box.net/shared/uftac8jns3


Dusan,

You have mail!!!!!!!!!!!!!

Tony
_________________________
Tyros 4/Pair SR 350/ PC with a i8 intel chip, XENYX 802, Ford Focus 2 litre/Tascam DR07/Brother printer/Designjet 500/ our Doris/5 Grandchildren/ white boxers short Kymart shipped over and Typhoo Tea Earl Grey

Top
#37324 - 11/08/10 12:07 AM Re: Attention Tony Hughes
Dusan Offline
Member

Registered: 05/04/09
Posts: 558
Loc: Slovenija
Quote:
Originally posted by Tony Hughes:
Dusan,

You have mail!!!!!!!!!!!!!

Tony


Tony,I haw no Email yet...Problems?

Top
#37325 - 11/08/10 03:02 AM Re: Attention Tony Hughes
Robbo Offline
Member

Registered: 07/31/08
Posts: 566
Loc: Ballarat, Victoria, Australia
Thanks Tony, and Dusan very much

Top
#37326 - 11/08/10 03:11 AM Re: Attention Tony Hughes
Robbo Offline
Member

Registered: 07/31/08
Posts: 566
Loc: Ballarat, Victoria, Australia
Tony the e-mail address is robkeith@westnet.com.au thanks

Top
#37327 - 11/08/10 05:24 AM Re: Attention Tony Hughes
NiteLife Offline
Member

Registered: 04/02/10
Posts: 264
Loc: Cape Coral, Florida USA
Robbo:

Make sure you check the connection between the sound board and the upper right panel board.

If you are having problems with the right or left main audio out's, that connection I believe is the culprit.

Jim

Top
#37328 - 11/08/10 08:56 AM Re: Attention Tony Hughes
Tony Hughes Offline
Senior Member

Registered: 01/30/06
Posts: 3930
Quote:
Originally posted by NiteLife:
Robbo:

Make sure you check the connection between the sound board and the upper right panel board.

If you are having problems with the right or left main audio out's, that connection I believe is the culprit.

Jim


Jim

Can you take a photo of the exact cable and I will put it into the PP.
_________________________
Tyros 4/Pair SR 350/ PC with a i8 intel chip, XENYX 802, Ford Focus 2 litre/Tascam DR07/Brother printer/Designjet 500/ our Doris/5 Grandchildren/ white boxers short Kymart shipped over and Typhoo Tea Earl Grey

Top
#37329 - 11/08/10 11:30 AM Re: Attention Tony Hughes
NiteLife Offline
Member

Registered: 04/02/10
Posts: 264
Loc: Cape Coral, Florida USA
Tony:

It's the only one that goes from the sound board and the top right panel board.

Yellow and White wires with short black coupling wires.

Didn't take pics when I had it apart. Sorry.

Jim

Top
#341892 - 03/12/12 04:11 PM Re: Attention Tony Hughes [Re: Robbo]
Chevy Offline
Member

Registered: 07/05/01
Posts: 57
Loc: Norway
Hello

Is there anyone out there who could send me instructions on how too open the Audya?

Thanks smile
_________________________
www.jaerlyd.no

Top
#341894 - 03/12/12 04:14 PM Re: Attention Tony Hughes [Re: Robbo]
Chevy Offline
Member

Registered: 07/05/01
Posts: 57
Loc: Norway
Email:
martin@jaerlyd.no
_________________________
www.jaerlyd.no

Top
Page 1 of 2 1 2 >

Moderator:  Admin, Ketron_AJ, Tonewheeldude 



Help keep Synth Zone Online