SYNTH ZONE
Visit The Bar For Casual Discussion
Page 2 of 5 < 1 2 3 4 5 >
Topic Options
#310741 - 05/14/10 02:05 PM Re: 4.2 Final.. Well guys ?
miden Offline
Senior Member

Registered: 01/31/06
Posts: 3354
Loc: The World
This issue I am having with the mod wheel, is it does not return the value to 0, after engaging.

But if you change to another device, IE go from the Dream Chip to Giga sounds it resets, go back to Dreamchip it resets, go to VST it resets, but while you are in the same it stays fully on.

Also it goes to full on, at the slightest touch, not graduated....

Re-calibrating does not help either.

Still experimenting for the hung notes, James has had.

All else on 4.2 seems okay

Dennis



[This message has been edited by miden (edited 05-14-2010).]

Top
#310742 - 05/14/10 02:07 PM Re: 4.2 Final.. Well guys ?
LIONSTRACS Offline
Member

Registered: 12/13/05
Posts: 664
Loc: Italy
Quote:
Originally posted by Irishacts:
Hi Domenico.

I've edited that file but it does not seem to have any effect on Jack. After reboot it still defaults to 128.

Regards
James


ok, this is not this file setup..I have to ask to 64studio where is located the right one.
jack start before the lionstracs application, it mean that is not on our script
I let you know when I get the reply from Free Ekanayaka

Top
#310743 - 05/14/10 02:09 PM Re: 4.2 Final.. Well guys ?
LIONSTRACS Offline
Member

Registered: 12/13/05
Posts: 664
Loc: Italy
Quote:
Originally posted by Irishacts:
BTW: The modulation wheel causes notes to hang now the second you touch it, and if I try to enter calibration for the wheel, the entire Lionstracs OS goes down and I'm left with just Linux on it's own.

Regards
James

[This message has been edited by Irishacts (edited 05-14-2010).]


this mean that you are calibrating under Joystick mode.
Touch the small RED icon and will change the interface to wheels.
the press ENTER to start and follow the information position that you have to give.
after each wheels position, press Enter to the next step

Top
#310744 - 05/14/10 02:11 PM Re: 4.2 Final.. Well guys ?
LIONSTRACS Offline
Member

Registered: 12/13/05
Posts: 664
Loc: Italy
on the ISO, by default is installed the Joystick hardware setup, for that you get this issue.
Calibrating under WHEEL mode and also you can invert the axix how you like.
Just formatted 8 Groove X-7 with wheels and I have to calibrate again each keyboard.
The tool is working, just have to understand how...

Top
#310745 - 05/14/10 02:21 PM Re: 4.2 Final.. Well guys ?
AFG Music Offline
Member

Registered: 03/12/09
Posts: 513
Miden and James,can you also test this. if you use headphones, press phones key and then set main mixer slider up or down, you get modulation effect on specially layer 4 sound, and for get off the modulation effect you have to press reset key!!!!!!!!!!!!!!!

I get this problem a long time, after my MS is repaired.

[This message has been edited by AFG Music (edited 05-14-2010).]

Top
#310746 - 05/14/10 02:23 PM Re: 4.2 Final.. Well guys ?
miden Offline
Senior Member

Registered: 01/31/06
Posts: 3354
Loc: The World
Thanks Dom,

Working fine now. Had to go into NOT the Calibration tab, but the Left/Right Joy or Modulation Wheel tab.

Turned the red ON/OFF button at bottom left to off, and the Mod wheel works as it should.

Cheers,
Dennis

PS: Now I will try a re-boot and see if it "remembers"...

[This message has been edited by miden (edited 05-14-2010).]

Top
#310747 - 05/14/10 02:24 PM Re: 4.2 Final.. Well guys ?
miden Offline
Senior Member

Registered: 01/31/06
Posts: 3354
Loc: The World
Quote:
Originally posted by AFG Music:
Miden and James,can you also test this. if you use headphones, press phones key and then set main mixer slider up or down, you get modulation effect on specially layer 4 sound, and for get off the modulation effect you have to press reset key!!!!!!!!!!!!!!!


By the way Dom, its Dennis...NOT miden...Don't be so formal

Top
#310748 - 05/14/10 02:28 PM Re: 4.2 Final.. Well guys ?
AFG Music Offline
Member

Registered: 03/12/09
Posts: 513
you mean AFG Music, Dennis

Top
#310749 - 05/14/10 02:30 PM Re: 4.2 Final.. Well guys ?
miden Offline
Senior Member

Registered: 01/31/06
Posts: 3354
Loc: The World
Sorry Dom, nope it does not save the setting.

When you re-boot, the same issue starts. Have to go back to config and do again everytime it restarts.

I DID click save, and even gave it a name.

Dennis

When press reset, it does reset the controller, but the second you touch the mod wheel, it goes straight to full modulation and stays there.

[This message has been edited by miden (edited 05-14-2010).]

Top
#310750 - 05/14/10 02:36 PM Re: 4.2 Final.. Well guys ?
miden Offline
Senior Member

Registered: 01/31/06
Posts: 3354
Loc: The World
Quote:
Originally posted by AFG Music:
you mean AFG Music, Dennis


ROTFL ...Oops sorry AFG...Yep thats what I meant!!!

Dennis

Top
Page 2 of 5 < 1 2 3 4 5 >

Moderator:  Admin 



Help keep Synth Zone Online