SYNTH ZONE
Visit The Bar For Casual Discussion
Topic Options
#29719 - 12/12/05 04:40 AM AJ Can Lower 1&2 be "Saved to a Reg" on the MIDJAY
Dnj Offline
Senior Member

Registered: 09/21/00
Posts: 42592
I want to save the lower sounds to a CERTAIN Registrations ONLY....its seems that you can only globaly turn this function ON or Off ? or am I wrong?

Top
#29720 - 12/12/05 10:25 PM Re: AJ Can Lower 1&2 be "Saved to a Reg" on the MIDJAY
Ketron_AJ Online   content
Moderator

Registered: 03/21/01
Posts: 3274
Loc: Middletown, DE
DNJ,

Your are correct - just Global for now.

Thanks,

AJ
_________________________
[KETRON - USA]
Design Engineer & Product Specialist.
www.KetronAmerica.com

Top
#29721 - 12/13/05 09:40 PM Re: AJ Can Lower 1&2 be "Saved to a Reg" on the MIDJAY
Dnj Offline
Senior Member

Registered: 09/21/00
Posts: 42592
AJ thanx for the reply I hope it gets corrected in future MIDJAY Upgrades...its an important feature for live play!

Thankyou

Top
#29722 - 12/15/05 02:06 PM Re: AJ Can Lower 1&2 be "Saved to a Reg" on the MIDJAY
Ketron_AJ Online   content
Moderator

Registered: 03/21/01
Posts: 3274
Loc: Middletown, DE
Donny,

The Registration cannot save the setting of the LOWER1&2. This
is dependent
on the style being used as in the Midijay, the style controls
the Lower
values, not the Registration.

If you want to use a style in various situations (some cases
with Lowere1&2,
some cases with only one and in other cases with neither), you
will have to
EDIT this style and save 3 versions of it with the cooresponding
Lower
setting (ignor the global on/off). The global on/off is used
during live
play when you want to permanently keep the Lowers ON or OFF.
When you have saved the various style versions, you can now use
THESE
(rather than the original style) within Registrations. Since the
Lower
setting is memorized within the style, it's cooresponing Lower
value will be
recalled each time you use a REGISTRATION to recall that
particular version
of the style.

So....

E.g You have a style SALSA .... which in some cases you want
loweres on ,
others off.

EDIT SALSA and save as ...(e.g.)
SALSA1 (in this case you have the volumes of both lowers "00" =
LOWERS 1&2
OFF.
SALSA2 (in this case you have volumes of say Lower1=00 and
Lower2 =70. =
LOWER1 OFF and LOWER2 ON.
SALSA3 (in this case you have volumes of say Lower1=70 and
Lower2=80. =
LOWER1 ON and LOWER2 ON. etc.

Now when using the REGISTRATIONS, save with cooresponding
Salsa1, Salsa2 or
Salsa3 style (depending on if you want Lowers OFF, one on, or
both on).

Let me know if you need further explanation on this.

Thanks,

AJ
_________________________
[KETRON - USA]
Design Engineer & Product Specialist.
www.KetronAmerica.com

Top
#29723 - 12/19/05 07:45 AM Re: AJ Can Lower 1&2 be "Saved to a Reg" on the MIDJAY
Dnj Offline
Senior Member

Registered: 09/21/00
Posts: 42592
Thanx AJ......
Its working fine now with your explaination...

Donny

Top

Moderator:  Admin, Ketron_AJ, Tonewheeldude 



Help keep Synth Zone Online