SYNTH ZONE
Visit The Bar For Casual Discussion
Page 2 of 3 < 1 2 3 >
Topic Options
#225969 - 02/04/08 07:46 PM Re: Bose L1 Model II cases
travlin'easy Offline
Senior Member

Registered: 12/08/02
Posts: 15556
Loc: Forest Hill, MD USA
Gotta' agree with Uncle Dave. My total setup time is 10 minutes or less using the Bose L1--piece of cake. And, when you consider that performers using a pair or powered speaker, a pair of speaker poles, plus a mixer, and all the other stuff they haul, their setup time has to be more than 10 minutes. The total time to set up the Bose L1 itself is, as Dave says, about 90 seconds. Ok, some days when my butt is draggin' it might take 2 minutes. And, each piece of the L1 is relatively light, especially when compared to powered speakers.

Cheers,

Gary

------------------
Travlin' Easy
_________________________
PSR-S950, TC Helicon Harmony-M, Digitech VR, Samson Q7, Sennheiser E855, Custom Console, and lots of other silly stuff!

K+E=W (Knowledge Plus Experience = Wisdom.)

Top
#225970 - 02/04/08 07:54 PM Re: Bose L1 Model II cases
Fran Carango Offline
Senior Member

Registered: 05/26/99
Posts: 9673
Loc: Levittown, Pa, USA
The Traynor K4 takes 10 seconds..plug it in and turn on the power switch..

and it had more "real" power too..
_________________________
www.francarango.com



Top
#225971 - 02/05/08 06:53 AM Re: Bose L1 Model II cases
travlin'easy Offline
Senior Member

Registered: 12/08/02
Posts: 15556
Loc: Forest Hill, MD USA
Quote:
Originally posted by Fran Carango:
The Traynor K4 takes 10 seconds..plug it in and turn on the power switch..

and it had more "real" power too..



Fran,

It's not nice to fib to the good folks on the zone. The K4 is only 300-watts peak-power, no subwoofer and does not come with the forklift needed to get it out of the car. The L1 is 1,400-watts peak, 750-watts RMS--no forklift required.

TRAYNOR K4TRAY Specs

Total Power: 300 Watts (200 Watts LF, 2 x 50 Watts H/M F)
Speaker Configuration: 1 x 12-inch 200 Low-Frequency Speaker
2 x 4.5-inch 30 watt Mid-Frequency Speakers
2 x 20 watt High-Frequency Compression Drivers
Channel 1 Input: 4 x ¼-inch TRS balanced (2 x Stereo Pairs)
Channel 1 Controls Gain control
Selectable Solid State or Tube input circuitry
Channel Voicing
3-band Channel EQ
Lead Gain Level
Tube-Drive Gain
Lead boost on / off
Channel 2 Inputs 2 x ¼-inch TRS balanced (Stereo Pair)
1 x XLR balanced microphone
Channel 2 Controls Gain Control
3-band Channel EQ
Channel 3 Inputs 2 x ¼-inch TRS balanced (Stereo Pair)
2 x RCA unbalanced
Channel 3 Controls Gain Control
Channel 4 Inputs Stereo ¼-inch Stereo Pair - Post Master Inputs
(located on rear of amplifier)
Channel 4 Controls Level control (located on rear of amplifier)
Master Section Volume control
Stereo XLR line output jacks w/ ground lift
Lead boost footswitch jack
1 x ¼-inch TRS headphone output
1 x ¼-inch mono sub output jack
Dimensions (WHD): 23.2 x 19.6 x 14.7
58.9 x 49.7 x 37.3
Weight (lbs/kg) 50 / 22.6

Bose L1 Specs

Mechanical

* L1 Model I Cylindrical Radiator® top
43''H x 3 1/2''W x 4''D (1.1 m x 8.9 cm x 10.5 cm)
14.5 lbs (6 kg)
* L1 Model I Cylindrical Radiator® bottom
43''H x 3 1/2''W x 4''D (1.1 m x 8.9 cm x 10.5 cm)
16.0 lbs (7 kg)
* L1 Model I power stand
5"H x 26"W x 26"D (12.7 cm x 66 cm x 66 cm)
35 lbs (16 kg)
* B1 bass module
15''H x 10 1/4''W x 17 3/4''D (38.0 cm x 26.0 cm x 45.0 cm)
25.1 lbs (11.4 kg)
* R1 remote
1 3/5"H x 2 4/5"W x 5 3/5"D (4.0 cm x 7.1 cm x 14.1 cm)
0.6 lbs (0.27 kg)

Electrical

* AC power rating
100-120V 50/60Hz 1400W (USA/Canada)

Power stand inputs/outputs

* Two combination XLR-1/4" inputs (channels 1 and 2)
* Two 1/4" line inputs (3 and 4)
* Two XLR outputs (1 and 2)
* Two TRS inserts/effects loops (1 and 2)
* Neutrik NL4 bass module output
* 1/4" bass line output
* Digital data in
* Digital data out
* R1 remote in

What's in the Box
L1 Model I Cylindrical Radiator® box

* Loudspeaker top and bottom
* Carrying bags

Power stand box

* Power stand
* Power cord
* R1 remote and cable
* Spare fuse
* Protective plug
* Carrying bag

B1 bass module box

* B1 bass module
* B1 bass module cable
* Carrying bag

Documents

* L1 Model I System Owner's Guide
* L1 Model I System Quick Set-up Guide
* B1 Bass Module Installation Guide

Cheers,

Gary

------------------
Travlin' Easy
_________________________
PSR-S950, TC Helicon Harmony-M, Digitech VR, Samson Q7, Sennheiser E855, Custom Console, and lots of other silly stuff!

K+E=W (Knowledge Plus Experience = Wisdom.)

Top
#225972 - 02/05/08 07:06 AM Re: Bose L1 Model II cases
Dnj Offline
Senior Member

Registered: 09/21/00
Posts: 43703
Honestly the Bose is not worth close to $3000.00

for just an average sound in a MONO system nothing earth shattering though dont kid yourself if you never heard one......that any top brand PA system could accommodate easily.....I truthfully found in many time very thin when I went out in the audience back in the room.. I know many people that had to but Bigger Power subs to make em dance. It is what it is. I sold mine and never regretted it.

[This message has been edited by Dnj (edited 02-05-2008).]

Top
#225973 - 02/05/08 08:11 AM Re: Bose L1 Model II cases
Fran Carango Offline
Senior Member

Registered: 05/26/99
Posts: 9673
Loc: Levittown, Pa, USA
Gary the K4 is not 300 watts peak,,it is true 300 watts..and anyone that has used one in a room that demanded volume will tell you it kicks butt...and the 12" woofer is very capable of a deep bass.[not sub woofer bass]..but maybe as good as that Bose so called sub ..

You should give it a real try...maybe blow some windows out..
BTW" Gary you know as well as anyone the number games when rating power amps ..we know the difference is the SPL..
_________________________
www.francarango.com



Top
#225974 - 02/05/08 08:25 AM Re: Bose L1 Model II cases
DonM Offline
Senior Member

Registered: 06/25/99
Posts: 16735
Loc: Benton, LA, USA
Donny, just curious - if you dislike the Bose so much and don't plan to get one, why would care about the cases for it?
DonM
_________________________
DonM

Top
#225975 - 02/05/08 08:35 AM Re: Bose L1 Model II cases
Dnj Offline
Senior Member

Registered: 09/21/00
Posts: 43703
Don.....


Its the design I dont like.......not the sounds for the most part...

when you have to set up & break down 2x & 4x a day it gets a bit annoying to unpack, unzipper, and try to stick them into the tight supplied covers....especially when your in a big rush... the whole design wasn't my cup of tea.....more then the sound which wasn't the problem vs my personal comfort level which comes first....of which I would say needed a bigger sub for more bottom end to my ears.. ...I certainly wasn't gonna carry 2 subs to add to all the pieces as it was...but if people love em ....
ENJOY baby enjoy!!




[This message has been edited by Dnj (edited 02-05-2008).]

Top
#225976 - 02/05/08 01:33 PM Re: Bose L1 Model II cases
travlin'easy Offline
Senior Member

Registered: 12/08/02
Posts: 15556
Loc: Forest Hill, MD USA
Fran,

I'll check it out the next time I can find a place that sells them close to my area. I'm always interested in a significant improvement, but the weight, which is listed at 50 pounds, is not my cup of tea. However, if you are going to supply the fork lift, I might take this into consideration.

As for the Bose wattage, it has more power than I'll ever need. When I performed a Concert In The Park at Aberdeen, Maryland's Municipal Park last summer I was able to easily reach folks that were sitting nearly 600 feet from the L1's tower. And, I never turned the master volume above 50 percent. I seriously doubt that the K4 could reach someone that far away, especially outdoors. Additionally, when I see a wattage specification on the spec sheet that does not say peak or RMS, I can guarantee you that it is is peak wattage--not RMS. Bose provides both peak and RMS ratings, which is the same thing that Barbetta, York, Peavey and a host of other manufacturers provide. If you have some information that shows this is not peak watts, I would sure like to see it.

Cheers,

Gary

------------------
Travlin' Easy
_________________________
PSR-S950, TC Helicon Harmony-M, Digitech VR, Samson Q7, Sennheiser E855, Custom Console, and lots of other silly stuff!

K+E=W (Knowledge Plus Experience = Wisdom.)

Top
#225977 - 02/05/08 01:43 PM Re: Bose L1 Model II cases
Fran Carango Offline
Senior Member

Registered: 05/26/99
Posts: 9673
Loc: Levittown, Pa, USA
_________________________
www.francarango.com



Top
#225978 - 02/05/08 01:51 PM Re: Bose L1 Model II cases
Fran Carango Offline
Senior Member

Registered: 05/26/99
Posts: 9673
Loc: Levittown, Pa, USA
Gary, maybe I can loan you a couple of my old roadies..
_________________________
www.francarango.com



Top
Page 2 of 3 < 1 2 3 >

Moderator:  Admin, Diki, Kerry 



Help keep Synth Zone Online