Hi
I have decided go by the advice of all the ppl out here.. I am gonna buy a PSR2000 I read something about the version of the keyboard. How do I find out and which is the latest?. Is the version printed somewhere on the KB or is there any other way to find out?
Thanx guys

Swamiji,
This was posted by "Scott Yee".
Quote:
You can all easily check your PSR2000's OS version by pressing/holding C#2, F2, G#2 simultaneously (C#maj triad chord) while turning on the keyboard. Use Tempo + / - and Star/Stop (Accompaniment) buttons to perform the various tests (main boot, main program, etc). The important one to check is: Main Program.

The latest ver. 1.2 it will have the new chips!
This should help you,
Nobby

------------------


[This message has been edited by Nobby (edited 03-13-2002).]

This does NOT seem to work on my new 2000. The serial number seems to suggest that the newer one is about 9000 units AFTER my original one - I wonder if there is a new test sequence to use?

Uncle Dave,

Are you saying that you don't know the version of your new PSR 2000 and also the C2#, F2, G2# ON procedure doesn't work in the new one ?

Linda Fus has a new PSR 2000 version 1.20. Linda, if you read this post, please test if the version procedure works on yours.

Thanks
Carlos Rodrigues

[This message has been edited by Rodrigues (edited 03-14-2002).]

That's what I'm sayin' !

Works on mine UD! But I got mine fairly
early!
Nobby
PS: Uncle Dave they could have changed it, I wouldn't bet on anything at this point.
I put out a flag on another thread trying to get a hold of LindaFus she has one of the later ones! Maybe she can enlighten us about it. Shurly they wouldn't change that!
Would they???
------------------


[This message has been edited by Nobby (edited 03-14-2002).]

Works on mine Uncle Dave. It says I have version 1.20!

-Linda

Uncle Dave,
Did this test work in your first 2000 board?
I can't understand it works easy as pie in mine!

------------------

Yes - it worked on the first one. Hmmmmmmmm?

It even works on the 1000. the one I had on loan was version 1.10

Korg AJ

I bought my 2000 right around Christmas time
I also have tried the procedure a lot of time to see what version i have but it never comes up...my serial# is 605906...i can't tell what version i have

I had 611614, , it went back. I sure hope your having better luck than I did!
jedi

If this helps.

My serial #619262

Thanks Jedi an Linda...I've only used mine to play styles and use the sequencer a little...i guess i'd better start the 2000 out

Uncle Dave, try 2nd Octave, then it works.

C# / F / G# -> keep pressed while turning power on.

The Screen Message: TEST

Then Pree Start Button and use Tempo +/- to step through the pages

Hmm - I never tried the second octave, good idea! I'll check it out later!

Uncle Dave,
At my first posting in this thread,
C#2 C sharp 2 octive
F2 F 2 octive
G#2 G sharp 2 octive
I'm sorry sometimes I don't explain what I mean very well.
All the best,
Nobby

------------------


[This message has been edited by Nobby (edited 03-19-2002).]

Maybe I was thinking that the lowest octave was C#2 - It works when I use the second octave. My version on the new unit is:
Main Boot 1.03
All else 1.00

Funny, huh? All the things that didn't work on the old one work in this one, and it's the SAME version. My sense of urgency is no longer an issue. I DO however, need the registration to remember different mic settings if I'm going to use it as a guitar amp .... works pretty good in this capacity.

I just did mine on the second octave and it worked...mine came up the same as Uncle Dave's...thanks for the help Nobby...

Actual Version is 1.20

MODIFICATION: Software update V1.00 => V1.10
1. The Fingering Type was not recorded in the registration memory when ACCOMP is turned on.
2. The data is not reproduced even if the registration button was pushed when Split Point was displayed on the pop up screen.
3. does not work occasionally.

MODIFICATION: Software update V1.10 => V1.20
1. The section setting returns to the default when entering in the song recording.
2. When it reproduces the style after it reproduces a built-in song, the style part is turned off.
3. The style does not stop if it does the overwrite recording.

Hi Ron,

Please correct:

Actual Version is 1.20
MODIFICATION: Software update V1.00 => V1.10
1. The Fingering Type was not recorded in the registration memory when ACCOMP is turned on.
2. The data is not reproduced even if the registration button was pushed when Split Point was displayed on the pop up screen.
3.DIRECT ACCESS + EXIT does not work occasionally.

MODIFICATION: Software update V1.10 => V1.20
1. The section setting returns to the default when entering in the song recording.
2. When it reproduces the style after it reproduces a built-in song, the style part is turned off.
3. The style does not stop if it does the overwrite recording.

Carlos Rodrigues

Hi Carlos,
correct. I did the mistake while copy/paste.

Thank you!

by the way.... portugese staff?