Dewey,

Got this doc from Yamaha:

Editing Song Track Parameters such as Voice and Volume on a PSR1000/2000

Individual Song Track Parameters such as Voice, Volume, Pan, Tempo, etc. can be changed by selecting the 'MIXING CONSOLE' function from the 'SET UP' view in 'SONG CREATOR'.

Changing the Voice (for Example) on a Track:
1) Load the Song into the PSR1000/2000.

2) Press the [DIGITAL RECORDING] button.

3) Press the [A] 'SONG CREATOR' button.

4) Use the [BACK] and [NEXT] buttons to display the 'CHANNEL' page in the screen.

5) Use the [A] and [B] buttons to display the 'SET UP' view in the screen.

6) Press the [MIXING CONSOLE] button repeatedly to select Channels 1-8 or Channels 9-
16 at the bottom of the screen ('CH1~8' or 'CH9~16' will display at the top of the screen).

7) Use the [BACK] and [NEXT] buttons to display the 'VOL/VOICE' page in the screen.

8) Use the [1] - [8] toggle buttons under the screen to select a Track.

9) Press the [H] button to select the 'VOICE' section in the screen.

10) Select a new Voice for the Track, using the buttons in the 'VOICE' section on the front
panel.

11) Press the [EXIT] button twice to return to the 'SET UP' view.


Saving the Edited Song:
1) Press the [I] 'SAVE' button.

2) Use the [BACK] and [NEXT] buttons to select the destination ('USER' or 'FLOPPY
DISK').

3) Press the [6 v] 'SAVE' button.

4) Press the [8 ^] 'OK' button.

5) Press the [F] 'YES' button to overwrite the old version of the Song with the new one.


Owner's Manual, p. 102-104