Quote:
Originally posted by Joan:
Hi there - Turn the keyboard upside down. You will see a "plate" on the underside, towards the rear - the KN7 plate is 2400 x 1000mm - Take out the fixing screws and you will see where the Expansion Boards will fit in. The KN7 takes 4 boards but I believe the KN6 only takes 2? Joan

Thanks Joan. We were to quik (we thought the board was on the same place as the KN6) and took off backside, which is almost the whole backside, and didn't find any place for the expansion-cards.
We give it a new try.
rgds.
Willem