With reference to : 'All Panel Memory changes were carried out using a 4 bank footswitch.'

The KN7000 has a facility for connection of 2 individual footswitches, via 1/4 inch jack sockets and a foot controller module which has 4 footswitches, via an 8 pin DIN socket.

These switches can be configured within the KN7000 operating system, to trigger a large number of functions such as Panel Memory Increment/Decrement, Rhythm Start/Stop, Intro/Ending, Fill-Ins, Sustain On/Off, Glide, Technichord On/Off, Rotary Tremelo Fast/Slow (for some Organ sounds) etc.

The particular functions assigned by the user to the footswitches, can be saved within the KN memory and combined with 'Song' data, when saved to SD card or disc. The option to save footswitch settings should be enabled, in the Panel Memory 'Expand' mode.

Using the footswitches to change the configuration of the keyboard, during live performance, means that you do not have to take your hands away from the playing keys, to change parameters.

I use both the individual footswitches and the bank of 4 module and normally have them set up as follows :
Individual
Footswitch 1 : Start/Stop
Footswitch 2 : Intro/Ending 2
4 Switch Module
Switch 1 : Fade Out
Switch 2 : Panel Memory Decrement
Switch 3 : Panel Memory Increment
Switch 4 : Technichord On/Off



------------------
Willum
_________________________
Willum

After silence, that which comes nearest to expressing the inexpressible is Music.
Aldous Huxley
( especially when the music is played on a KN7000....)