Hi Audrey
Thanks for your suggestion. I had been concentrating on the style side of things and your post made me think outside the frame I was working in.:O I did all you suggested but nothing seemed amiss. I tried everything in these areas, but still no luck. Then out of desperation I thought to try the "Custom Panel" button. Eureka !!!!
I don't know where the problem was, but that fixed it. In an effort to track the actual problem I tried saving the fixed version with a different name and switching back and forth between the two, to try and spot the difference in the settings. Beats me but hey,the result is great.
Thanks for the sugestions that made me approach from a new angle.
Regards
Eddie

Quote:
Originally posted by Audrey Turner:
Try going to:-

Programme Menu
Part Setting
Scroll through Part 1 & 2
(You should now be at LEFT part)
Check to see if the Key Shift is '0' or whether it matches part 1 & 2. If not, take the necessary action to clear it.

Also the 'Pan' setting could be different, making either/any part sound higher or lower than others.

Another area to check is the 'Expand Mode Filter' Look at page 2 to see whether the 'transpose' matches all parts. Maybe a part has been altered from a previous setting and forgotten about.

Worth looking at anyway - hope this helps.

Aud (U.K.)