OK Bernie here we go ----
Let’s use terms from the Kn7000 which you know.

All of this will be from the top of my head because I do not own
a KMA any longer; but I should be pretty close

1-Performance = Panel memory
2-Performance = Panel memory extended
3-Program = Selecting an instrument from sound memory
4-Program/Performance has 10 buttons on the top and when you press the last button it will bring you to 10 buttons below. My MKA had all the top buttons 1 thru 10 filled in. The buttons at the bottom 11 through 20 were empty. I recommend that you use the buttons below to store your information.

When using the performance button without the Style Change button you will be setting up the sounds in both hands and their volumes – Kn7 Panel memory.

5-Let’s start simple by selecting a button of your choice from the 1 through 10.
6-Press Card Write near the center of the keyboard. You will see:
A- Perf. Name: stereo piano Change this to the name you wish to see in the performance page.
B- Perf. N:01-1 Stereo Grand – This is the Panel Memory/Performance where you will save the new performance. Since we are not using Panel Memory/Performance 1 through 10 you must change the setting to #11 the first button on the bottom row.
C- Press enter – then answer “Yes” The information is now saved in Performance #1

7-Next job is to select the instruments/or layered instruments you want in the right and left hand– edit the volumes and save them to Performance in the same manner.
Bernie I can’t go any further until we talk on the phone. Till then feel free to ask.

John C.