Hi all,

I just wanted to correct a post I made ages ago re the chord sequencer on the PA3...

In making that post I was relying on memory and a read of the PA3 manual, which was not really clear on it.

Well, I have now come to re-acquire a PA3X 76 (short story is the PA2x developed the LED issue, dealer agreed to replace plus relatively small upgrade fee $'s with a PA3)

So I thought I would re-visit this question. Good news is it CAN be controlled from the EC5 foot switch!! And only one switch is required for record and playback...

I also discovered that the Assignable foot switch can also be used, but it can only be set to either CS record start, or CS play...I don't think the assignable foot switch socket is stereo, so a stereo foot switch could not be used...in any case the interface does not allow an option to set both CS record and play to the one foot control....as written above the EC5 is different.

So there you have it, CS can be controlled, and very easily, from the EC5 pedal...

Dennis