Originally posted by jwyvern:
Chony I'm assuming you have installed the Yamaha midi USB driver on your PC and whenever you plug Ty2 into the computer (and switch on) the latter recognises it OK.
When starting the editor for the first time (and occasionally at later times) the inputs and outputs can be difficult to find or sustain.
When the editor is running look for a small floating silver coloured window approx 2" x half inch in size. You'll likely find it towards the top middle of your screen and it has the words Midi Setup written in green lettering.
Click on its button (left of centre) then select Digital Workstation-1 (or whatever looks like Ty2) in the In & OUT boxes, then OK.
Now go to the Set up menu in the main Ed. window and select Setup. Do the same there for In & Out.
Note: The Ch and Device nos. on mine are both 1.
Click OK
As soon as you do that you should find data transfer is enabled.
When the editor is running correctly the Ty2 screen changes to a text screen with the heading "Custom Voice Edit Mode"
John
[This message has been edited by jwyvern (edited 07-07-2008).]
I've done all of that, I get the screen change on the Tyros 2, but still the message "reception error"... :-(
Previous Topic
Index
