Originally posted by Tom Cavanaugh:
I was using a matching (Radio Shack)transformer with my Tyros and getting poor results. Not only that but it was another clunky addition to an otherwise sleek setup. I just took a regular mic cable and cut the end off it and soldered on a 1/4 inch phone jack. It works great. There is no need for the matching transformer.
Tom
RadioShack sells a cable with the male XLR connector on one end and a 1/4" TRS on the other - I have a couple for my mics when using an amplifier without XLR inputs (my old Peavey KB-300). This works well. Wonder if it will work for a Tyros too.
Regards
Previous Topic
Index
