Hi Mosiqaar,
Sounds like your slides are dirty!
Slids are very good at getting dirty!
Their open and dirt can easily get down in them. You will have to clean them.
Do they sound like static when you move them?
The problem is that people don't keep a dust cover on them, as much as they could, this would help a lot. If you got the right kind of cleaner you could spray them and move them back forth maybe 9 or 10 times, they will probably clear up.
I've did it on a lot of a lot of electronic devices when I was in the repair busness.
But that's a pretty expensive piece, you could go inside, but those slides are closed controls. So you might as well clean them from the top!
Go to Radio Shack or some place like that and tell them what you want to clean. Just try one at first when you spray in the slide groove, work your slide back & forth several times,. That cleaner will all evaperate.
Turn the power off while your cleaning,if it's poping a lot.
Hope this helps.
Nobby
PS: Be careful with that hookup, it don't
sound right! Without the proper load you could burn up a output transister! But I'm to tired to think.
I'll try to get back with you tomorrow!
Good Night,
Nobby




[This message has been edited by Nobby (edited 04-12-2002).]