Hi Tony,

The demo files are not installed automatically when the OS is updated. Follow the steps below to install the new demo.

Steps to load new Genesys demo:

1. Insert the Genesys O.S. upgrade CD
2. Press [Disk Button]
3. Press Soft Button [C] on left of display
4. Press [Down Cursor] until the System Folder named DEMO is highlighted
5. Press Soft Button [F7] to select M.Copy (Multi-Copy)
6. Press [Down Cursor] until the System Folder named DEMO is highlighted
7. Press Soft Button [F1] to Add the CD folder to the Hard Drive Folder
8. Press [F4] to Execute the M.Copy command
9. Press [Yes] twice to confirm
10. Press [F2] :Yes All
11. After the copy process is completed, press [Escape]
12. Remove the upgrade CD from the CD Drive

Now if you press the [Demo] button, you should hear the new demo.

Regarding the Genesys Pro- The latest OS for the Pro version (no speakers) is 1.01. Be sure not to mix the two OS versions up when installing them into the instruments.

I hope this helps,

Dave