Posted by: Anonymous
Nord Lead 2 tuning problem
- 11/01/98 12:07 PM
Has anybody else experienced a problem with master tuning of the Nord Lead 2 where the tuning "drifts" & must be retuned to other instruments? I emailed Clavia about this. They were not familiar with the problem but speculated that it might have to do with the pitch bend circuitry.
Posted by: Nigel
Re: Nord Lead 2 tuning problem
- 11/21/98 05:38 PM
Sometime when sequencing it is possible that while editing bars that have used the pitch wheel, that you can cut off the pitch wheel's return to center which leave a synth frozen at the the last pitch wheel parameter it recieved, and the wheel needs to be recentered manually.
Check that it is not a particular sequence that always leave your synth out of tune. This may not be your problem, but it is an easy mistake to make.
Posted by: Anonymous
Re: Nord Lead 2 tuning problem
- 02/07/99 02:04 PM
I returned the Nord Lead 2 in December to Sweetwater Sound to fix the tuning problem under the warranty. They concluded that the problem was related to the pitch bend circuitry & replaced with new circuitry. It has been fine ever since.
JWC