Question for Donny regarding S970 set up.

Posted by: Eric, B

Question for Donny regarding S970 set up. - 07/17/16 03:38 PM

Hi Donny,
My wife and I usually perform with 2 Bose L1 compact a mixer and VoiceLive3.
The sound is awesome and we are happy with it.
We are thinking of trying one Bose straight to the S970 and the Mics into the KB for smaller gigs up to an hour.
Here is my question:
Everything works fine and the sound is decent enough, except the Mic volume.
I have to turn the styles down to 80 and the Mic up to 127 and max in the back to have enough volume.
I adjusted EQ and compressor in the KB already which gave me a little more, but not much.
We are using Telefunken M80 Dynamic Mics, which are awesome.
Any thoughts? Wisdom? wink
Thanks a lot
Eric
Posted by: jingleman

Re: Question for Donny regarding S970 set up. - 07/17/16 04:09 PM

Eric, Are you using an mic impedence transformer? If not, you'll have to. That should take care of any volume issues.

Jingleman
Posted by: Eric, B

Re: Question for Donny regarding S970 set up. - 07/17/16 04:48 PM

Hi Jingleman.
Thanks for the answer.
I just tried my set up adding my trusted Mackie Mixer.
The preamps took care of it. smile Great sound.
I'll get a smaller mixer for those small gigs and all is well smile
http://www.sweetwater.com/store/detail/402VLZ4
Eric
Posted by: Dnj

Re: Question for Donny regarding S970 set up. - 07/17/16 04:52 PM

Eric first off what type of mics are you using? I had this problem also especially with my Senn mic... I find that different ones give different gains big time...
My EV ND767 works best when used without a mixer & kb ....but I always use a small mixer eg: Yamaha Mg06x as the pre amps with the KB & Mics it will give up more lift in volume plus more versatility in adjusting vol of mics & KB to balance it during performance ....hope this helps..
Posted by: Eric, B

Re: Question for Donny regarding S970 set up. - 07/17/16 05:05 PM

Thanks Donny,
As mentioned above I am using Telefunken M80 Mics.
They are great. smile
As you said I will go with a small mixer for better preamps and flexibility.
Eric
Posted by: shueymusic

Re: Question for Donny regarding S970 set up. - 07/17/16 06:17 PM

Hey Eric...

My wife and I use the PSR-S970 for gigs. We use a Sonar (Roland) VS100. Got it a few years back for only $199. It has 2 mic pre amps... But most importantly, it has compression and FX built in. I love the SD card to either record our gig or to have WAV file backups of our gig arrangements.

Do you use your EV sub with the Bose Compacts?

Also, do you have any videos of your act?
Posted by: Dnj

Re: Question for Donny regarding S970 set up. - 07/17/16 06:27 PM

http://www.rolandus.com/products/v-studio_100/
Posted by: travlin'easy

Re: Question for Donny regarding S970 set up. - 07/17/16 07:46 PM

Eric, does the mic require phantom power?

Gary cool
Posted by: Dnj

Re: Question for Donny regarding S970 set up. - 07/18/16 05:46 AM

Eric do you also have the "assignable knobs" set for Mic Vol/styles etc,?.... and boost compression settings (CMP)also can help a bit.

This section explains how to make and save the detailed settings for the microphone/guitar.
1 Connect a microphone or guitar, press the [MIC SETTING/VOCAL HARMONY] button
(PSR-S970) or [MIC SETTING] (PSR-S770) button to call up the operation display, then
press the [A] (MIC/GUITAR) button to set it to ON.
This lets you talk into the microphone or play the guitar and hear the changes made while setting the
parameters.
2 Press the [B] (EQ/CMP) button to call up the EQ/CMP SETTING display.
3 Select the desired page, MIC/GUITAR or TALK, by using the TAB [E][F] buttons.
NOTE The settings on the TALK page are the settings that are active when the [F] (TALK) button is on.
4 Use the [A]–[E] buttons to select the specific row (or group) of parameters to be
adjusted.
5 Set the value of specific parameters in the row by using the [1 ]–[6 ] buttons.
For information on each parameter, see pages 89–90.
NOTICE
After setting, go to the EQ/CMP SETTING MEMORY display by pressing the [I] (USER MEMORY) button and save the settings (see
page 89). The settings will be lost if you exit from this display or turn off the power to the instrument without carrying out the Save operat
Posted by: Eric, B

Re: Question for Donny regarding S970 set up. - 07/18/16 04:37 PM

Originally Posted By: shueymusic
Hey Eric...

My wife and I use the PSR-S970 for gigs. We use a Sonar (Roland) VS100. Got it a few years back for only $199. It has 2 mic pre amps... But most importantly, it has compression and FX built in. I love the SD card to either record our gig or to have WAV file backups of our gig arrangements.

Do you use your EV sub with the Bose Compacts?

Also, do you have any videos of your act?



Hi Jonathan,
Thanks for your reply.
I will get a small mixer that should take care of it.
Yes, I am using my sub. It is a perfect match for the Bose.
Sorry at this time I don't have any videos.
I am hoping to do some in the near future as we are going to create a website.

Eric
Posted by: Eric, B

Re: Question for Donny regarding S970 set up. - 07/18/16 04:38 PM

Originally Posted By: travlin'easy
Eric, does the mic require phantom power?

Gary cool


Hi Gary,
2 Dynamic mics. No phantom power needed. wink
Eric
Posted by: Eric, B

Re: Question for Donny regarding S970 set up. - 07/18/16 04:43 PM

Originally Posted By: Dnj
Eric do you also have the "assignable knobs" set for Mic Vol/styles etc,?.... and boost compression settings (CMP)also can help a bit.

This section explains how to make and save the detailed settings for the microphone/guitar.
1 Connect a microphone or guitar, press the [MIC SETTING/VOCAL HARMONY] button
(PSR-S970) or [MIC SETTING] (PSR-S770) button to call up the operation display, then
press the [A] (MIC/GUITAR) button to set it to ON.
This lets you talk into the microphone or play the guitar and hear the changes made while setting the
parameters.
2 Press the [B] (EQ/CMP) button to call up the EQ/CMP SETTING display.
3 Select the desired page, MIC/GUITAR or TALK, by using the TAB [E][F] buttons.
NOTE The settings on the TALK page are the settings that are active when the [F] (TALK) button is on.
4 Use the [A]–[E] buttons to select the specific row (or group) of parameters to be
adjusted.
5 Set the value of specific parameters in the row by using the [1 ]–[6 ] buttons.
For information on each parameter, see pages 89–90.
NOTICE
After setting, go to the EQ/CMP SETTING MEMORY display by pressing the [I] (USER MEMORY) button and save the settings (see
page 89). The settings will be lost if you exit from this display or turn off the power to the instrument without carrying out the Save operat


Thanks Donny, for your detailed explanation.
Yes I did exactly all that already.
As you said: some Mics don't have as much gain.
I am looking at the Mackie 402VLZ4:
https://www.amazon.com/dp/B00EDRUQXC/ref...=I3T75VKWCB8T0L

Or Yamaha MG06X :
https://www.amazon.com/dp/B00I2J4V5G/ref...YN3Y9&psc=1

I hooked up my larger mixer and all is well.
A small mixer will take care of it and give me the flexibility I need. smile
Eric
Posted by: jingleman

Re: Question for Donny regarding S970 set up. - 07/18/16 04:57 PM

Eric: If you don't want to hassle with a mixer...this would do the job as well.

Sweetwater
Posted by: Eric, B

Re: Question for Donny regarding S970 set up. - 07/18/16 05:06 PM

Thanks wink
I'll check it out
Eric
Posted by: Dnj

Re: Question for Donny regarding S970 set up. - 07/22/16 05:55 AM

Originally Posted By: Eric, B
Thanks wink
I'll check it out
Eric



so Eric how did it workout?....hope you found a solution?
Posted by: Eric, B

Re: Question for Donny regarding S970 set up. - 07/22/16 01:11 PM

Originally Posted By: Dnj
Originally Posted By: Eric, B
Thanks wink
I'll check it out
Eric



so Eric how did it workout?....hope you found a solution?


Thanks Donny,
I have a crazy work schedule this week and hadn't have time to do anything.
I will go with a small mixer:
Either this one:
https://www.amazon.com/dp/B00EDRUQXC/ref...=I3T75VKWCB8T0L

Or this one:
https://www.amazon.com/dp/B00I2J4V5G/ref...YN3Y9&psc=1

I will probably get one next week smile
Eric
Posted by: Dnj

Re: Question for Donny regarding S970 set up. - 07/22/16 02:31 PM

Originally Posted By: Eric, B
Originally Posted By: Dnj
Originally Posted By: Eric, B
Thanks wink
I'll check it out
Eric



so Eric how did it workout?....hope you found a solution?


Thanks Donny,
I have a crazy work schedule this week and hadn't have time to do anything.
I will go with a small mixer:
Either this one:
https://www.amazon.com/dp/B00EDRUQXC/ref...=I3T75VKWCB8T0L

Or this one:
https://www.amazon.com/dp/B00I2J4V5G/ref...YN3Y9&psc=1

I will probably get one next week smile
Eric

The Yamaha MG06X has great EFX also...
Posted by: Eric, B

Re: Question for Donny regarding S970 set up. - 07/22/16 04:10 PM

Thanks Donny smile
Just ordered one rocker keys

Eric
Posted by: Dnj

Re: Question for Donny regarding S970 set up. - 07/22/16 04:16 PM

Originally Posted By: Eric, B
Thanks Donny smile
Just ordered one rocker keys

Eric


kool Eric good move.....if you need voc fx settings let me know
Posted by: Eric, B

Re: Question for Donny regarding S970 set up. - 07/22/16 04:53 PM

Originally Posted By: Dnj



kool Eric good move.....if you need voc fx settings let me know


Thanks Donny,
I would love to have some to get started. wink
Eric