Posted by: tony mads usa
To: Z-5500 owners ... - 02/13/06 05:57 PM
... F Y I
As mentioned in another thread, I spent a good part of Sunday converting my 55s to 1/4" plugs ... Well, when I went to test them I was getting distortion through the sats, like the spkrs were over loaded ... of course I figured I screwed it up somehow...
I called Logitech customer service and the tech told me to turn off the control pod and press 'input' and 'settings' ... that showed the "software rev #" (I think mine was 2.0.4) ... and he had me try the spkrs again ... no improvement ...he then had me press 'input' and 'effects' and it showed "Diagnostics test" ... he then had me try it again, and voila, the problem was gone .. It seems this sets the unit back to the factory settings ... I still don't know if I did anything wrong, but at least the problem is gone ...
t.
As mentioned in another thread, I spent a good part of Sunday converting my 55s to 1/4" plugs ... Well, when I went to test them I was getting distortion through the sats, like the spkrs were over loaded ... of course I figured I screwed it up somehow...
I called Logitech customer service and the tech told me to turn off the control pod and press 'input' and 'settings' ... that showed the "software rev #" (I think mine was 2.0.4) ... and he had me try the spkrs again ... no improvement ...he then had me press 'input' and 'effects' and it showed "Diagnostics test" ... he then had me try it again, and voila, the problem was gone .. It seems this sets the unit back to the factory settings ... I still don't know if I did anything wrong, but at least the problem is gone ...
t.