Posted by: mr82thebar
Tyros Music Bracket Pictures - 07/25/05 03:50 PM
Thanks to Gary Diamond for posting the pictures of the modified brackets for the Tyros muic stand. Slots were done on a bandsaw, but can be done with a hacksaw. Good Luck, Bob L.You will find the pic at the How to post pictures subject.
Posted by: KFingers
Re: Tyros Music Bracket Pictures - 07/26/05 08:38 AM
Not sure what you are trying to achieve with the home made brackets but you can buy proper Yamaha adaptors so that your Music rack and/or your Tyros speaker brackets can just slide on and off
I got mine from a German site for a few Euros - They'll post internationally to you for a few more euros.
This makes transporting the Tyros easy as I no longer have the brackets protruding from the keyboard and just slide on the music rack brackets etc into the close fitting adaptors fitted instead
KF
Posted by: mr82thebar
Re: Tyros Music Bracket Pictures - 07/26/05 05:05 PM
The brackets are the ones that came with the Tyros. All i did was slot the brackets. It took me five minutes to finish,and they have been working just fine. I guess it's a matter of choice. I didn't have to buy anything else to start using my Tyros.Also i was aske to show how i modified the brackets,thus the pictures. Bob L.
Posted by: Bill in Dayton
Re: Tyros Music Bracket Pictures - 07/26/05 06:22 PM
Fingers-
Can you provide a link or a image for us to look at?
Bill in Dayton
Posted by: Scott Langholff
Re: Tyros Music Bracket Pictures - 07/26/05 10:02 PM
I see, so you just slide the whold thing over the scews that you leave stick out a little bit?
I kept thinking you had sawed 2 seperate slots on each piece. This makes more sense to me.
Thanx for going to all the trouble to post these pics.
Best
Scott
Posted by: mr82thebar
Re: Tyros Music Bracket Pictures - 07/26/05 11:10 PM
You are very welcome. The brackets work just great. Good Luck, Bob L.